







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Newport Beach Homeowners Choose PGT Construction
We provide independent PGT window and door service in Newport Beach: diagnosis, OEM-matched repair, and full replacement on WinGuard and Architectural Series units. What makes our PGT work different is that we identify the actual failure first – a fogged insulating glass unit, a worn roller, a failed sash balance – before anyone orders a part. We’re an independent service provider, not affiliated with, authorized by, or acting as a warranty agent for PGT, and that independence is exactly what lets us tell you when a repair is the honest call and when replacement is. Call (833) 749-3967 for a free estimate.
Why Trust Groundwork Construction Co. of Newport Beach for Your PGT Construction?

Our technicians have up to 12 years of experience with PGT product families, which matters because PGT builds several distinct systems that fail in different ways. A WinGuard Vinyl impact window and a WinGuard Aluminum impact slider share a brand name but almost nothing else in their hardware, glazing, or water management. Knowing which one you’re looking at before the service call is the difference between a one-visit fix and three trips waiting on the wrong part.
We source OEM-compatible PGT replacement IGUs, sashes, rollers, balances, and hardware assemblies for the model and vintage in front of us. When a piece is discontinued, we use quality aftermarket equivalents that preserve the original operation – never a generic roller or balance that changes how the door glides or how the sash sits in the frame. That discipline is what keeps service warranty-safe: work performed to spec on the correct components doesn’t create a reason for a manufacturer to disclaim a unit. Every project carries our 730-Day Done Right Promise, so if something we serviced isn’t right, we come back and make it right. In Newport Beach, where salt air and coastal exposure punish shortcuts, that matters more than it does inland.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common PGT Construction Problems We Fix in Newport Beach
- WinGuard insulating glass seal failure and interior fogging. Marine air and hard afternoon sun on west- and south-facing glass drive the edge seal to fail, and moisture migrates between the panes. Owners notice a hazy, cloudy look that doesn’t clean off from either side. Once the seal is gone the unit’s insulating value is gone with it, which is why we identify whether the failure is the glass or the frame before quoting.
- Slider roller, track, and weep-system failure on PGT sliding glass doors. Hard-to-slide panels, water pooling in the bottom track, and wind-driven rain intrusion at the sill all trace back to the same group of parts. Worn rollers, a jumped or corroded track, and clogged weep channels let water sit instead of draining, and salt air accelerates the corrosion. This is the single most common PGT service call we handle on bay-facing walls in Newport Beach.
- Sash balance and tilt-latch failure on PremierVue and ReliaGuard vinyl single-hung and double-hung units. Sashes that drop when you let go, won’t stay up, or sit visibly out of square are usually a worn balance or a broken tilt-latch rather than a frame problem. Vinyl moves with heat, and a balance that’s been cycling for years loses tension before the frame shows any issue.
- Corrosion and finish breakdown on aluminum frames, hinges, and screens. Within a few blocks of the water, aluminum frames pit, hinges stiffen, and window screens show spline shrinkage and torn mesh faster than anywhere inland. Marine-grade coatings and stainless fasteners slow it; nothing stops it entirely.
- Architectural Series clad and wood-interior unit wear. The wood interior and clad exterior on Architectural Series units fail on different schedules. Interior finishes dry and check while the exterior cladding holds up, and hardware between the two is often the first thing to need attention.
PGT Parts & Our Repair-vs-Replace Approach

For current PGT models we use OEM replacement IGUs, sashes, rollers, balances, and hardware assemblies wherever they’re still available for that model and vintage. We don’t keep a local parts inventory; components are sourced per job, matched to the exact series and build year, so the part that arrives is the part that fits. For discontinued pieces we use quality aftermarket equivalents only where they preserve the original operation.
The repair-or-replace call is where owners get talked into the wrong thing most often. A single failed seal on a five-year-old WinGuard unit is a glass swap. An older single-pane or first-generation unit with two or three failed seals is usually a full-unit replacement once you add up repeat glass work, and we’ll say so plainly even though the replacement is the bigger ticket. For Newport Beach homeowners weighing that decision, call (833) 749-3967 and we’ll walk through the math with you – estimates are free.
Our PGT Service Process – Step by Step
- 1
Diagnosis. We identify the exact PGT series and build vintage, then test operation: roller drag, balance tension, weep drainage, and IGU seal condition. On a fogged unit we confirm the failure is between the panes, not on the surface.
- 2
Repair or install. OEM-matched parts are ordered and fitted – rollers, track, weatherstrip, sill components, sash, balance, or a full IGU. We clear and re-aim weep channels as part of any slider repair, because a fixed roller on a clogged weep system just leaks again.
- 3
Test. We cycle the unit through its full range, check head and jamb for water staining, and confirm drainage before we call it done.
- 4
Warranty. Every PGT project we complete is covered by our 730-Day Done Right Promise, in writing. If it’s not done right, we make it right.
See the difference
Before
After
Before
After
Before
AfterPGT Products We Service & Install in Newport Beach
We service and install the PGT lines that dominate coastal Orange County builds: WinGuard Aluminum impact-resistant windows and sliding glass doors, WinGuard Vinyl impact windows and doors, the Architectural Series in aluminum-clad with wood interior, and PremierVue and ReliaGuard vinyl single-hung and sliding windows. We also handle impact window installation to current coastal code and roof repair work that involves protecting and resealing around window and door openings during re-roofing. If your unit isn’t on this list, call and we’ll tell you straight whether it’s something we cover.
We Also Service These Brands
PGT is a focus, not a limitation. We also service and install KraftMaid cabinetry, Kohler plumbing fixtures, GAF roofing systems, and Master Halco fencing, and we work across a curated set of top-tier material brands in every trade. Owners who want one contractor coordinating windows, roof, and interiors get that from us in Newport Beach without juggling separate crews.
FAQs – PGT Construction Service in Newport Beach

Is Groundwork Construction Co. of Newport Beach authorized by PGT? No. We’re an independent PGT service provider and we are not affiliated with, authorized by, or endorsed by PGT, and we don’t act as a warranty agent for the manufacturer. We service PGT windows and doors as an independent contractor using OEM-compatible parts. Call (833) 749-3967 for a free estimate.
Do you use genuine PGT/OEM parts? Yes, wherever OEM replacement parts are still made for your model and vintage. We use OEM PGT IGUs, sashes, rollers, balances, and hardware assemblies for current lines, and quality aftermarket equivalents only for discontinued pieces – never a generic roller or balance that changes the door’s operation.
How long does PGT service take? Most single-unit repairs – a roller set, a balance, a sash replacement – finish in one visit once the correct part is on hand, and parts are sourced per job so timing depends on availability for your series. Full-unit replacements and impact installations run longer because of ordering and permitting. Call (833) 749-3967 and we’ll give you a realistic timeline for your specific units.
What PGT models/series do you cover? We cover WinGuard Aluminum and WinGuard Vinyl impact windows and doors, the Architectural Series in aluminum-clad and wood interior, and PremierVue and ReliaGuard vinyl single-hung and sliding windows. Tell us the series on your stickers or paperwork and we’ll confirm coverage.
Will service void my PGT warranty? Service performed to manufacturer spec with correct components doesn’t create a reason to disclaim a unit, and we work warranty-safe by matching parts to your model and vintage. We can’t make warranty determinations on PGT’s behalf since we’re independent – check your original documentation for coverage terms, and we’ll handle the work correctly either way.
How much does PGT construction cost in Newport Beach? The ranges below are market-calibrated for Newport Beach and depend on unit count, series, and whether frames are being replaced. Call (833) 749-3967 for an exact quote – estimates are free.
| Service | Typical Range (Newport Beach) |
|---|---|
| Window Replacement | $4,500 – $15,000 |
| Impact Window Installation | $8,000 – $25,000 |
| Roof Repair | $400 – $1,800 |
| Roof Replacement | $8,000 – $20,000 |
Call (833) 749-3967 to schedule your free estimate.
Book Your PGT Service in Newport Beach, CA
Whether it’s a fogged WinGuard unit, a slider that sticks and weeps at the sill, or a full impact window installation, we’ll diagnose it first and quote it upfront, no surprises. Every project is backed by our 730-Day Done Right Promise, and our technicians are background-checked and arrive in uniform. Call (833) 749-3967 for a free estimate.
Written by the team at Groundwork Construction Co. of Newport Beach.












