







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Custom & Geometric Windows in Laguna Beach: What to Expect
Custom and geometric windows in Laguna Beach typically run $8,000 to $25,000 for a whole-house package, and most single-room installs land between $4,500 and $15,000 depending on shape, glazing, and framing. Arched, angled, trapezoidal, and radius units are built to order, so expect 6 to 12 weeks from signed contract to final inspection. Call (833) 749-3967 for a free on-site measure and a written line-item quote.
How we build and install custom & geometric windows, stage by stage

Geometric units aren’t a stock item you pull off a shelf. The sequence below is how a real job runs in Laguna Beach, from the first measurement to the final walkthrough.
Stage 1: Field measure and design review (1 – 2 weeks)
We template every opening on site rather than trusting plan dimensions, because 1920s – 1950s beach cottages here are rarely square. At this stage you decide the shape, the glazing package, and the interior finish. If your home sits in the coastal zone, this is also when the design-review conversation starts, since a new window line can affect a viewshed.
Stage 2: Order and fabrication (6 – 10 weeks)
Custom and geometric windows are fabricated to your exact template, so lead times drive the schedule more than labor does. You sign off on the shop drawings and glass specification before anything goes into production. Marvin and Andersen are the two lines we lean on for radius and angled units because their field support and replacement-part channels hold up over time.
Stage 3: Demo and rough prep (1 – 2 days per opening)
We pull the old unit, inspect the framing and flashing, and repair any rot before the new window goes in. Salt air and marine layer do a number on exterior wood and fasteners here, so we replace compromised framing rather than cover it. This is where surprises usually surface, and where a fixed-price quote protects you.
Stage 4: Install, flash, and seal (2 – 4 days for a typical package)
Each geometric unit is set, shimmed, and flashed with the same care on the head, sill, and jambs. We use corrosion-rated fasteners and sealant rated for coastal exposure. You’ll walk the openings with us before the interior trim goes back on.
Stage 5: Trim, finish, and final inspection (3 – 5 days)
Interior trim, exterior caulk, and touch-up happen here. If your permits require inspection, we schedule it and meet it. Most full packages wrap in one continuous push once materials land.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The choices you’ll actually make for geometric windows
Every custom window job comes down to a handful of decisions. Here’s the honest trade-off on each.
- Frame material: Wood-clad aluminum gives you the warmth of wood inside and a weather-resistant exterior, which suits coastal exposure well at the higher end of the price range. All-vinyl is the budget option and holds up fine but limits shape flexibility.
- Glass package: Standard dual-pane is fine on shaded elevations. Pacific-facing windows benefit from a low-E coating and laminated glass, which adds cost but cuts UV and salt-driven deterioration.
- Shape complexity: A single arch or angled unit is straightforward. A trapezoid or a curved wall of radius windows needs custom templating and drives both fabrication cost and lead time.
- Function: Fixed units cost less and seal better; operable units add hardware and air-sealing work. Many geometric windows here are fixed by design.
- Finish and trim: Interior wood trim, drywall return, or a minimalist reveal each change labor and the final look.
We walk you through these choices with real samples before anything is ordered, so you’re choosing quality, not just whatever’s in stock.
What Custom & Geometric Windows cost in Laguna Beach, CA

Plan on $8,000 to $25,000 for a full custom and geometric window package, or $4,500 to $15,000 for a smaller install. A handful of variables push a job toward either end:
- Number and shape of units: Five standard arches sit near the low end; a dozen angled or radius units climb toward the top.
- Existing condition: Rot, failed flashing, or out-of-square framing adds demo and rebuild labor.
- Glass and frame grade: Laminated, low-E, and wood-clad aluminum raise cost; basic vinyl keeps it down.
- Access: Steep canyon and hillside lots with no driveway access mean staging on the street and hauling units up stairs, which adds real labor.
- Permit scope: Coastal-zone projects that trigger design review and coastal review add time and fees.
A written estimate itemizes every unit, the glazing spec, demo, flashing, trim, and permit fees. What it won’t include unless we’ve discussed it: structural reframing if an opening has to change size, and any interior painting beyond touch-up.
See the difference
Before
After
Before
After
Before
AfterWhat Laguna Beach homes specifically do to this job
Construction here runs through a discretionary design-review gauntlet. The Community Development Department scrutinizes every project for view preservation, hillside stability, and design compatibility, and much of town sits in the coastal zone where the California Coastal Commission can weigh in on anything affecting public viewsheds or bluff-tops. No neighboring city shares that exact mix of view ordinances, hillside rules, and coastal overlay, and a window line that changes an elevation can draw a neighbor’s view claim. That’s why we get design input early rather than after units are ordered.
The housing stock adds its own complications. Dense 1920s – 1950s cottages tucked into canyon lots, mid-century Modernist homes, and custom rebuilds on steep, tight sites often have little or no driveway access, so we stage on the street or through private lanes and carry materials up slopes. Marine layer, salt air, and Pacific exposure corrode fasteners and exterior wood, so the failure modes we see most are failed seals, fogged glass, and rotted sills on old units – exactly the reasons homeowners replace them with properly flashed, coastal-rated geometric windows.
Serving Laguna Beach, CA – Our Local Coverage Area
We serve Laguna Beach and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked – Custom & Geometric Windows in Laguna Beach

Most jobs take 6 to 12 weeks from contract to completion, with fabrication eating the bulk of that time and the on-site install running a few days to a couple of weeks. Calling ahead of storm season keeps the timeline off the critical path. Call (833) 749-3967 to schedule your measure.
Most window replacements here require a permit, and coastal-zone or view-affected projects can trigger design review. We handle the paperwork and schedule inspections as part of the job. Call (833) 749-3967 and we’ll confirm what your address needs.
Yes, when the new unit fits the existing opening. Changing an opening’s size or shape can require structural reframing, which we flag at the measure so it’s in the quote, never a surprise. Call (833) 749-3967 for an assessment.
We spec units with wind-load ratings matched to your elevation and use corrosion-rated fasteners and flashing built for salt air. On Pacific-facing walls we recommend laminated or impact-rated glass. Call (833) 749-3967 to talk through ratings for your address.
Every install is backed by our 730-Day Done Right Promise, and the window units carry their manufacturer warranty on top of that. If something isn’t right, we make it right. Call (833) 749-3967 with any warranty question.
Get a free on-site estimate for custom & geometric windows
When you call (833) 749-3967, a live person answers around the clock and books a free on-site measure. We’ll template the openings, talk through shape and glazing options, and hand you a written, itemized quote with fixed pricing – plus our 730-Day Done Right Promise and 0% financing for 18 months. If this is part of a full Windows & Doors in Laguna Beach scope, or you’re pairing it with Concrete Driveways & Concrete Work in Laguna Beach or Asphalt Driveways & Resurfacing in Laguna Beach, we’ll quote it together. Review our Windows & Doors service, and see the Laguna Beach area we cover.
Written by the team at Groundwork Construction Co..












