







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Impact Windows & Doors in Irvine, CA: What the Job Actually Involves
Impact windows and doors in Irvine typically run $8,000 – $25,000 for a whole-house package, and most single-family installs take two to four working days. Impact windows and doors are rated assemblies – laminated glass in a reinforced frame with tested anchoring – not ordinary glazing with a film applied, which is why the price sits well above standard replacement. Call (833) 749-3967 for a free on-site estimate, and we’ll walk the house with you before quoting a number.
How We Run an Impact Windows & Doors Project, Stage by Stage

The sequence matters more in Irvine than in most cities, because a mis-ordered step can stall a job at the architectural review gate. Here’s the order we follow.
Stage 1: Site walk and product selection (day 1, about 90 minutes). We measure every rough opening, photograph the existing frames, and note which units are sliders, fixed panes or hinged doors. You decide the product line and glass package at this visit, not later, because the submittal package depends on it. Homes running ES Windows or Therma-Tru door systems get their spec sheets pulled the same week. This is also when we ask for your HOA’s architectural guidelines.
Stage 2: ARB submittal and permit filing (days 2 – 14, mostly waiting). This is the stage most homeowners underestimate. We assemble the color and style submittal your village’s architectural review committee requires, file the city permit, and track both. Review timelines vary by village and by season, so budget two weeks and be pleasantly surprised if it moves faster. Nothing gets ordered until the submittal clears, because ordering the wrong frame color is a five-figure mistake.
Stage 3: Fabrication and delivery (weeks 3 – 8). Impact assemblies are built to order. Laminated glass and reinforced frames aren’t stocked in every size, so this lead time is normal. We confirm the delivery window in writing and schedule install dates only after units are on the ground.
Stage 4: Installation (2 – 4 days for a typical house). We protect floors and set up a work zone. Old units come out, openings get squared and flashed, new frames are shimmed, anchored and sealed, and interior trim goes back on. You decide at the start whether trim is reused or replaced, and whether interior paint touch-up is in scope. Each opening takes roughly two to four hours; sliders and doors take longer.
Stage 5: Inspection and walkthrough (final day). The city inspects the install, we demonstrate operation and locking hardware on every unit, and we hand over the product warranty paperwork alongside our own 730-Day Done Right Promise. If a screen is mis-sized or a latch drags, it gets fixed before we leave the driveway.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Your Options: What You’re Actually Choosing Between
Most of the decision comes down to four choices, and each one moves both the price and the look of the house.
- Frame material – vinyl vs. aluminum. Vinyl is the value play and insulates well; aluminum is slimmer, holds color longer in strong sun, and often matches what Irvine tract homes already have. Aluminum costs more, sometimes 15 – 25% more per opening.
- Glass package. Standard laminated impact glass meets code. Upgrading to low-E or a higher solar-heat-gain rating costs extra but pays back on west-facing rooms that bake all summer. Worth it on a two-story with big afternoon exposure; skip it on shaded north walls.
- Configuration. Fixed panes are the cheapest per square foot, sliders cost more, and hinged or multi-panel doors cost the most. If you’re keeping existing openings the same size, you save real money on framing and finish work.
- Door systems. Entry and patio doors need the same impact rating as windows. Therma-Tru and similar fiberglass or steel systems balance impact performance with a look that passes most palettes; solid wood impact doors exist but cost considerably more and need more upkeep in dry heat.
If the scope grows beyond glazing into full exterior work, it’s often part of a full Windows & Doors in Irvine plan that we scope together.
What Impact Windows & Doors Cost in Irvine, CA

The realistic Irvine range is $8,000 – $25,000 for a whole-house impact window and door package. A single impact door or a handful of openings can land near the bottom; a two-story home with sliders and a patio door pushes toward the top.
Five things move the number:
- Opening count and size. Ten windows vs. twenty changes everything. Large sliders and picture windows cost more per unit than standard casements.
- Existing frame condition. Rotted or out-of-square framing needs repair before new units go in. That’s extra labor most quotes leave out.
- Structural changes. Widening an opening or converting a window to a door pulls in framing, header work and possibly engineering.
- Glass and frame grade. Aluminum, low-E and premium hardware all add up.
- Permit and ARB scope. City permit fees and any HOA submittal costs are real line items.
A written estimate from us lists product, labor, permit fees, disposal and trim as separate lines. It typically does not include interior painting or drywall repair beyond the opening, and it won’t include structural repair discovered after demo – we quote that separately, in writing, before doing it. The number you see is the number you pay on the scope we agreed to.
See the difference
Before
After
Before
After
Before
AfterWhat Irvine Homes Specifically Do to This Job
Irvine is a master-planned city built largely from the 1970s forward, so most of the work happens in HOA-governed villages like Woodbridge, Northwood and Turtle Rock rather than on old-house rehab. That changes the job in ways that don’t come up one city over in Santa Ana or Tustin. Every exterior change, including window and door style and color, runs through an architectural review committee, and the city’s design code is strict about what’s acceptable. We check the village palette before you pick a frame finish, because a beautifully installed window in the wrong color is a violation notice waiting to happen.
The housing stock also shapes it. Post-1970 tract homes often have original single-pane aluminum units that are now past their service life, and condos and townhomes in ZIP codes 92612, 92603, 92616 and 92618 sometimes share master insurance requirements that specify impact-rated glazing. Great Park-area newer builds come with their own environmental-review layers. And because Irvine sits in a semi-arid climate with long dry summers, we see sun-baked seals and faded frame finishes more often than water damage – different failure modes than a coastal city would show. When homeowners pair this with exterior hardscape, they often add Aluminum Fence in Irvine or Iron Fence in Irvine in the same project window.
Serving Irvine, CA – Our Local Coverage Area
We serve Irvine and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Impact Windows & Doors in Irvine

A typical Irvine install takes two to four working days once the units arrive, with total project time from contract to final inspection running six to twelve weeks because of fabrication lead time and ARB review. Plan for the wait; it’s the honest timeline. Call (833) 749-3967 and we’ll give you a specific schedule for your home.
Yes, both. The city requires a permit for window and door replacement, and nearly every Irvine village HOA requires architectural review approval for style and color changes. We prepare the submittal and file the permit for you. Call us for a free estimate and we’ll walk you through your village’s specific requirements.
Usually yes. If the new units match existing opening sizes, the work stays in the frame and doesn’t touch plumbing or structural framing. Widening openings or converting windows to doors does pull in framing and possibly engineering, which we scope and price separately. We’ll tell you which category your home falls into before you commit.
Expect $8,000 – $25,000 for a whole-house package, with single doors or small counts landing lower. Aluminum frames, low-E glass and larger sliders push toward the top of the range. Call (833) 749-3967 for an exact quote – estimates are free and we itemize every line.
Every impact window and door install we do carries our 730-Day Done Right Promise, one of the longest workmanship guarantees in the residential construction space, on top of the manufacturer warranty on the units themselves. If something isn’t right, we make it right. Our technicians have up to 12 years of experience and arrive background-checked and in uniform.
Get a Free Estimate for Impact Windows & Doors in Irvine
We’ll come to your home, measure every opening, check your village’s architectural guidelines and hand you a written, line-item estimate for impact windows and doors in Irvine. No pressure and no vague ranges. Call (833) 749-3967 to schedule your free on-site estimate – a live person answers around the clock. Ask about 0% financing for 18 months and $1,000 off projects over $10,000. Our team handles Windows & Doors across Irvine and nearby Tustin, Aliso Viejo, Santa Ana and North Tustin.
Written by the team at Groundwork Construction Co.












