







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Iron Fence in Irvine: What It Costs and How Approval Works
A wrought iron fence in Irvine typically runs $3,500 to $9,000, with most single-family lots landing between $5,000 and $7,500 for 80 to 120 linear feet. The work itself takes two to four days once materials arrive, but the timeline that catches Irvine homeowners off guard is the architectural review: most villages require written approval before a single post goes in. Call (833) 749-3967 and we’ll walk through your village’s requirements before you commit to a design.
How We Run an Iron Fence Job, Start to Finish

Every iron fence we build in Irvine follows the same five stages. Here’s what actually happens, and what you’ll be asked to decide at each one.
Stage 1: Site visit and measurement (day 1, about 90 minutes). We measure the full run, check property lines against your plat map, and photograph the existing fence or open grade. You decide the general look here: picket versus flat-top, height, and whether the fence needs to screen a pool, a side yard, or the street. We also note any HOA-relevant details, like the color of your neighbor’s fence if it’s a shared boundary.
Stage 2: Architectural submittal (days 2 through 10, mostly waiting). This is the Irvine step that isn’t optional. Most master-planned villages require a submittal to the architectural review committee with a drawing, material and finish sample, and photos of the existing fence. We prepare the drawing and color chip for you. You sign the form. Approval typically comes back in one to three weeks, and we can’t order or install until it does. Skipping this step is how homeowners end up tearing out a fence they just paid for.
Stage 3: Fabrication and material order (1 to 3 weeks). Standard black iron panels in common heights are usually in stock and ship quickly. Custom heights, arched tops, or a specific powder-coat color add one to two weeks. You confirm the final finish color here, which is the last easy moment to change it before fabrication.
Stage 4: Demo and installation (2 to 4 days on site). Day one is removal of the old fence and layout. Day two is post setting in concrete, and posts need to cure before panels hang. Days three and four are panel installation, gate hanging, and touch-up. We check every gate for swing and latch before we leave.
Stage 5: Final walkthrough (end of the last day, 30 minutes). We walk the line with you, check gate alignment, confirm the finish, and leave you the warranty paperwork. If the job is part of a full Fence Installation in Irvine, the final walk covers the whole perimeter at once.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Choices You’ll Actually Make on an Iron Fence
Iron fencing isn’t one product. The decisions below drive both the look and the price, so it helps to know the honest trade-off on each.
- Material: true wrought iron versus steel. Real wrought iron is heavier, holds up beautifully, and costs more. Most residential work uses tubular steel made to look like wrought iron, which is lighter, resists rust well when powder-coated, and is the practical choice for most Irvine lots. You’re paying for looks and durability either way; the steel version gets you there for less.
- Finish: powder coat versus paint. Powder coat is baked on, holds color for years, and is what we recommend in Irvine’s dry climate. Field paint is cheaper upfront but needs touch-up every few years. Standard black is the most common color and the easiest to get approved.
- Height: 4, 5, or 6 feet. Four feet reads as decorative and is common along the street. Five feet is the usual pool or side-yard barrier. Six feet gives privacy and is sometimes restricted by village rules near the front. Check before you commit.
- Style: picket, flat-top, or ornamental. Simple flat-top panels cost less and clear review faster. Ornamental panels with finials and scrollwork look great and take longer to fabricate.
- Gates and hardware. A pedestrian gate with a self-closing hinge is standard. A driveway gate is a separate, heavier job. Decide early so the posts are sized right the first time.
What Iron Fence Costs in Irvine, CA

The range for iron fence in Irvine is $3,500 to $9,000. Here’s how a job lands at the low or high end.
- Linear feet (the biggest driver). A 60-foot side yard sits near the bottom. A 200-foot perimeter sits at the top.
- Material grade. Standard steel panels keep you in the middle of the range. True wrought iron, custom heights, and ornamental detail push toward the high end.
- Existing fence removal. Hauling off an old wood or chain link fence adds time and disposal cost.
- Grade and soil. Sloped lots need stepped panels and deeper posts, which adds labor.
- Gate count and automation. Each gate adds cost, and an automated driveway gate is a separate line item.
Every estimate is written line by line: linear feet, material spec, finish, gate count, removal, and any grading. That’s upfront pricing with no surprises, and the number on the page is the number you pay. What’s not included is typically landscape repair after post holes, painting or staining of adjacent wood, and any HOA or city submittal fees, which we list separately so there’s no confusion later.
See the difference
Before
After
Before
After
Before
AfterWhat Irvine Homes Specifically Do to This Job
Irvine is a master-planned city built almost entirely by the Irvine Company from the 1970s onward, so almost every iron fence here runs through an architectural review committee in addition to the city’s own design-review process. That’s the reality in Woodbridge, Northwood, and Turtle Rock alike, and it’s why we build the submittal into the schedule rather than treating it as an afterthought. Approval gates and color palettes here are stricter than they are one city over in Santa Ana or Tustin, where older, unincorporated stock often skips that layer entirely. Housing is overwhelmingly post-1970 tract homes and townhomes, so we’re usually replacing a builder-grade wood or vinyl fence rather than working around century-old structure. The semi-arid climate – warm dry summers, mild winters, very little rain – means rust and sun-faded finish are the failure modes we see, not rot or freeze damage.
Serving Irvine, CA – Our Local Coverage Area
We serve Irvine and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked: Iron Fence in Irvine

Plan on three to six weeks total, with only two to four days of actual on-site work. The rest is architectural review and fabrication. Call (833) 749-3967 for a realistic schedule based on your village.
Most Irvine villages require architectural review committee approval, and the city may require a permit depending on height and location. We prepare the submittal drawing and color chip for you so the process is straightforward.
Yes. Standard black finish at a common height clears review fastest, and we confirm your village’s approved palette before ordering materials so nothing gets built twice.
Usually, yes. Posts go into small concrete footings, and we work around established plants where possible. Some landscape repair after post holes is normal, and we tell you where before we start.
Every job is covered by our 730-Day Done Right Promise: if it’s not done right, we make it right. That’s one of the longest workmanship guarantees in residential construction. Call (833) 749-3967 to schedule your free estimate.
Get a Free Iron Fence Estimate in Irvine
Call (833) 749-3967 for a free on-site estimate on your iron fence in Irvine. We’ll measure the run, review your village’s architectural requirements, and give you a written line-item quote with material spec, finish, and gate count spelled out. No pressure and no vague totals. A live person answers, and homeowners often pair this with Patios, Walkways & Pool Decks in Irvine or with ADU Design & Permitting in Irvine when the yard is getting a bigger overhaul. You can also see our Fence Installation service and the full Irvine service area.
Written by the team at Groundwork Construction Co.












