







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Vanities, Tile & Fixtures in Orange, CA: What It Costs and How Long It Takes
Vanities, tile and fixtures work in Orange typically runs $9,000 to $28,000 for a full gut-and-replace of the vanity, floor, shower walls and fixtures in a primary bath, and most jobs take 2 to 4 weeks once materials are on site. A vanity-only swap is far less, usually $800 to $3,000 installed. Call (833) 749-3967 and we’ll walk the room with you, take measurements, and put a line-item number in writing.
How We Sequence a Vanities, Tile & Fixtures Job in Orange

The order matters more than most homeowners expect. Tile has to be set before the vanity lands, and the vanity has to be set before the faucet and drain go in. Get it backwards and you’re pulling a 60-inch cabinet to fix a rough-in. Here’s how the job actually runs.
Stage 1: Demo and tear-out (day 1 to 2)
We shut the water, pull the old vanity, remove the toilet if the floor tile runs under it, and strip the existing flooring and shower walls down to framing and subfloor. This is where we find out what’s wet. In Orange homes built in the 1970s and 1980s, a failing shower pan liner or a slow vanity supply leak is common, and that discovery changes the next step. You don’t have to decide anything at this stage – we send photos before we cover anything back up.
Stage 2: Rough-in and inspection (days 2 to 4)
If you’re moving the vanity or changing a shower valve, the plumbing and electrical rough-in happens now. You decide here: staying in the same footprint, or shifting the vanity to gain counter space? A relocated drain line adds real cost, but a same-spot replacement doesn’t require it. If the scope touches plumbing or electrical, we pull the permit and schedule the inspection before anything gets closed up. Drywall and backer board go on after it passes.
Stage 3: Waterproofing and tile layout (days 4 to 8)
We apply the waterproofing membrane to the shower and wet areas, then lay out the tile. This is the decision-heavy part. You’ll pick the tile and the pattern (stacked, herringbone, offset), the grout color, and the trim or Schluter edge. Large-format tile looks clean but needs a flatter substrate and costs more in labor. Small hex or penny tile hides a floor that’s slightly out of level and gives you more grip. We template the vanity countertop at the end of this stage.
Stage 4: Vanity, countertop and fixtures (days 8 to 11)
The new vanity gets set and shimmed level, the countertop goes on, and the sink, faucet, drain and shut-off valves are connected. This is where you choose the vanity material and the top. A 48-inch KraftMaid or Wellborn cabinet in a painted finish with a quartz top is the combination we install most in Orange. You also pick the faucet finish, the mirror or medicine cabinet, and the lighting. Everything has to be spec’d by now, so pick fixtures before demo, not after.
Stage 5: Final finishes, caulk and walkthrough (days 11 to 14)
Tile gets sealed if it’s natural stone, the room gets a final clean, and we walk it together. We test every fixture, run the shower, check for leaks at the supply and drain, and confirm the vanity drawers and doors close cleanly. Any punch item gets written down and handled. That final walkthrough is where the 730-Day Done Right Promise starts ticking.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between on Vanities, Tile & Fixtures
Most of the final price depends on choices you make before demo. Here’s what we walk through with you, and the honest trade-off on each.
- Vanity material and size. A stock 36-inch cabinet in MDF or particleboard runs at the low end; a semi-custom 60-inch double-sink cabinet from a maker like KraftMaid or Wellborn costs more but fits the space properly and lasts longer. Solid wood and plywood hold up better in a wet room than particleboard, especially on a floor with a shower.
- Countertop. Quartz is the practical pick in Orange: it doesn’t stain like marble, doesn’t need sealing, and holds up to daily use. Marble and granite are premium options but marble etches and granite needs periodic sealer.
- Floor tile. Porcelain is the workhorse – dense, water-resistant, and available in wood-look and stone-look finishes. Natural stone (travertine, slate) costs more in material and in labor and needs sealing.
- Shower wall tile vs. slab. Tile gives you design flexibility at moderate cost. A solid-surface or quartz slab wall costs more up front but has no grout to clean, which is why it’s common in newer homes and remodels near Chapman University.
- Fixtures. A standard chrome tub/shower valve and trim is the low-end anchor; a thermostatic valve or a rain head with a diverter adds cost and complexity. Kohler and Moen are the brands we install most.
- Lighting and ventilation. A new vanity light and an exhaust fan that actually vents outside (not into the attic) matters in a bathroom that sits closed up most of the day.
What Vanities, Tile & Fixtures Costs in Orange, CA

For a full bathroom vanity, tile and fixture update in Orange, plan on $9,000 to $28,000. A smaller bathroom scope lands between $5,000 and $12,000. Vanity-only installation is the low end at $800 to $3,000. Vanity-heavy jobs or anything with a walk-in shower install can run higher. Here’s what moves the number:
- Size and layout. A hall bath with a standard 30-inch vanity costs far less than a primary bath with a 60-inch double vanity and a full shower.
- Existing condition. Water damage behind the tile or a rotting subfloor adds demolition, framing and repair. We find it after demo, so the estimate is set up to flag a range, not to hide it.
- Relocating plumbing or electrical. Moving a drain, adding a GFCI outlet for a new vanity light, or rerouting the shower valve adds cost and often triggers the permit.
- Material grade. Porcelain over $3/sq ft is very different from $12/sq ft marble or glass mosaic.
- Permit scope. A pure cosmetic swap (paint, faucet, vanity on existing rough-in) typically doesn’t need a permit. Moving plumbing, adding a new drain, or installing a new shower valve usually does, and that adds time and inspection cost.
A written estimate from us includes demo, disposal, rough-in, waterproofing, tile, vanity and fixtures – and it doesn’t move unless the scope changes. What it doesn’t cover is structural repair or mold remediation, which get quoted separately once we see it. Call (833) 749-3967 for an exact quote – estimates are free.
See the difference
Before
After
Before
After
Before
AfterWhat Orange Homes Specifically Do to This Job
Orange has two housing stocks that force two different kinds of vanities, tile and fixtures jobs. In Old Towne and the Plaza District, we’re working in 1870s-to-1920s bungalows and Victorians, where the rough-in is often cast iron and the walls are plaster and lath. Pull a vanity out of one of those and you don’t get drywall – you get a wall that needs patching, so budget for it. Historic-district design review can also slow a scope that touches windows or exterior walls, and we build the schedule around that approval cycle rather than pretending it doesn’t exist.
Out east, in 92869 and the surrounding ZIPs (92865, 92857, 92859), we’re in 1970s-to-1990s tract and custom homes, where the enemy is the original shower pan and builder-grade vanity. In those homes the tile is usually intact, but the waterproofing behind it is not. Periods of drought followed by heavy rain, plus Santa Ana conditions, are hard on plumbing seals and subfloors, and it shows up in a bathroom first. Most of these are simple swaps – existing plumbing stays put, no permit needed. When we touch a drain or valve, we pull the permit and schedule inspection. Full bathroom remodels live on our Bathroom Remodeling in Orange page; this page is the vanity, tile and fixture side of it, and it’s a common pairing with Tile Roofing in Orange when homeowners are updating exterior tile at the same time. For the wider project, our Bathroom Remodeling service handles the full room. We cover the whole Orange area, and homeowners sometimes pair this interior tile work with Specialty Roofing in Orange on the same visit. Choose the vanity and tile for the job, not just what’s in stock.
Serving Orange, CA – Our Local Coverage Area
We serve Orange and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Vanities, Tile & Fixtures in Orange

A typical vanity, floor tile and fixture update takes 2 to 4 weeks, with demo in the first two days and tile work in the middle. Lead times depend on material availability and permitting if plumbing or electrical moves. Call (833) 749-3967 for a timeline on your room.
Cosmetic swaps like replacing a vanity on existing rough-in or laying tile over an existing subfloor usually don’t require a permit, but moving a drain, adding a valve, or new electrical does. Call (833) 749-3967 and we’ll confirm the permit scope before you sign anything.
Yes, in most cases. If the new vanity matches the existing drain and supply locations, no plumbing relocation is needed and the job stays cheaper and faster. We check that on the estimate visit.
Staying in the same footprint keeps the job toward the lower end of the $9,000-$28,000 range. Moving plumbing pushes it higher. Call (833) 749-3967 for an exact quote – estimates are free.
Every project is covered by the 730-Day Done Right Promise – if it isn’t done right, we make it right, and that includes workmanship on tile, vanity and fixture installation. Call (833) 749-3967 to schedule a free estimate.
Schedule a Free Estimate for Vanities, Tile & Fixtures in Orange
Call (833) 749-3967 for a free on-site estimate on vanities, tile and fixtures in Orange. A live person answers around the clock, so you won’t get bounced to voicemail. We’ll walk the room, talk through vanity size, tile options and fixture choices, and leave you with a written line-item number. Upfront pricing, no surprises, and financing at 0% for 18 months if you need it. Estimates cost nothing.
Written by the team at Groundwork Construction Co.












