A Groundwork company - serving Newport Beach, CA
A backyard with a new horizontal privacy fence
Iron Fence · Dana Point, CA

Iron Fence in Dana Point - Written Price Per Foot, Permit Handled

We locate the property line, pull the permit, and handle HOA approval before a post goes in. Written price per foot, quoted on site, with no add-ons at the end.

Call to schedule your free estimate

Work is performed by our local vetted partner.

Free
Written Quotes
Licensed & Insured Written Quotes Free Estimates All Brands Satisfaction Guarantee

Work is performed by our local vetted partner.

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Newport Beach
A new black aluminum pool fence with a gate
A new wood side gate with black hardware
A freestanding soaking tub in a remodeled primary bathroom
A second-story addition that matches the existing roofline
A newly finished roof with a ridge vent and step flashing
A new front entry door with glass sidelights
A new curved paver walkway to the front porch
A galley kitchen opened up to the dining room with a new peninsula
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Iron Fence in Dana Point, CA: What the Job Really Takes

An iron fence in Dana Point runs $3,500 to $9,000 for most residential lots in 92629, with a typical side-yard or street-front run landing around $5,000. The work itself takes two to four days on site once your material is fabricated and coated, and the first of those days is almost entirely layout and hole-digging. Call (833) 749-3967 and we’ll walk you through what your specific property needs.

Call (833) 749-3967

How We Build an Iron Fence, Stage by Stage

A new white vinyl privacy fence with a double gate

Iron isn’t a fence you assemble from a stack of panels in an afternoon. The sequence matters, and so does the timing between steps. Here’s what actually happens on your property, and where you’ll need to make a call.

Day 1: Layout, utilities, and hole excavation. We mark the run, confirm property lines against your plat or survey, and call in a utility locate before anything breaks ground. Posts get dug to depth and set in concrete. On canyon and bluff lots, that means we’re watching for buried irrigation lines and old retaining wall footings that don’t show on any drawing. Your decision here: final gate swing direction and post placement relative to your existing walk.

Day 2: Setting and curing. Posts cure in their footings. This isn’t a wasted day – it’s what keeps the fence plumb for the next twenty years. We use the time to confirm the picket spacing you selected, check the rail heights against your grade breaks, and stage material.

Day 3: Panel and rail installation. Rails get welded or bolted to posts, pickets are set and leveled, and gates are hung and adjusted. If your fence follows a slope, this is where the step-down or racked layout shows its real character, and it’s the stage most homeowners want to walk through before we close out.

Day 4: Finish inspection and touch-up. We check gate latches, verify clearances, touch up any scratched coating, and clean the site. Your decision here: final walkthrough and sign-off, which is when your 730-Day Done Right Promise coverage begins.

Most Dana Point iron fence jobs finish within a single visit schedule of two to four days on site. Custom fabrication adds two to three weeks before we ever arrive, so the honest timeline from contract to completion is closer to three to five weeks.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

The Choices That Shape Your Iron Fence

Iron fencing isn’t one product. What you select changes the price, the maintenance, and how the fence ages in salt air.

  • Wrought iron (solid bar stock): The traditional look, hand-forged or machine-formed, with genuine structural heft. It’s the high end of the range and the best fit for a custom estate fence on a bluff lot. Expect it to last decades with periodic recoating.
  • Tubular steel (often sold as ornamental iron): Lighter wall thickness, usually pre-primed or powder-coated, and the most common choice for residential runs. Cost sits in the middle of the $3,500 – $9,000 band. It’s a real iron look at a working price, though it dents more readily than solid bar.
  • Powder-coat vs. paint finish: Powder coating is baked on and holds up far better against marine-layer humidity and salt-laden onshore air. Field paint touches up scratches but needs redoing every few years near the coast. On Dana Point lots close to the harbor, powder coat pays for itself.
  • Picket spacing and height: Four-foot heights suit garden borders; five- to six-foot runs with tighter picket spacing are what most homeowners choose for pool and property line safety. Tighter spacing means more material, so it moves the number.
  • Gate style and hardware: Manual swing, self-closing hinges, or an automatic opener. Hardware is where coastal corrosion shows up first, so we spec marine-grade hinges and latches on every iron gate near the water.

Aesthetics aside, the one trade-off worth naming: iron costs more than wood or vinyl up front and gives you a fence that outlasts both. If you’re already planning a wider hardscape or yard project, this pairs naturally with Patios, Walkways & Pool Decks in Dana Point so the fence line and paving get set together.

What Iron Fence Costs in Dana Point, CA

New architectural shingles with a clean valley

Residential iron fence installation in Dana Point lands between $3,500 and $9,000 for most properties, with the majority of jobs in the $4,500 to $7,000 range. Here’s what moves the number:

  • Linear footage: The single biggest driver. A 60-foot side-yard run sits near the low end; a 200-foot street-front perimeter pushes toward the top.
  • Material grade: Tubular steel at the low end, solid wrought iron at the high end. Powder coating adds to either.
  • Site conditions: Rocky ground, steep canyon slopes, or existing concrete that has to be cut and removed all add labor. Flat, open lots are the fast jobs.
  • Gates: One manual walk gate is straightforward; a double driveway gate with an automatic opener adds meaningfully.
  • Permits and coastal review: Most residential iron fence work doesn’t trigger coastal development review on its own, but if your property sits on a bluff-top or canyon parcel with an existing permit history, plan for the extra review time.

Every written estimate we hand you is line-itemed: footage, material grade, finish, gates, and any site prep. No surprises when the crew shows up. What typically isn’t included – and we’ll flag it in writing – is removing an old fence if one exists, and any grading or retaining work needed to make the fence line stable. That kind of groundwork often ties into an ADU Design & Permitting in Dana Point or site plan if you’re building out the property.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

What Dana Point Homes Do to This Job

Dana Point’s iron fence work happens on properties that range from 1960s single-story ranch homes in the older Capistrano Beach blocks to newer custom builds on the coastal terraces above the harbor. The common thread is that marine-layer humidity, salt air, and winter storm surf go after fasteners and hardware faster than most homeowners expect. We spec stainless or hot-dip galvanized fasteners on every job here, because painted mild steel will show rust within a few seasons on a lot near the water.

On canyon and bluff parcels off Del Obispo and Selva, the reality is different again. Those 1970s homes often sit on cut-and-fill pads, and the fence line frequently crosses ground that was graded decades ago and never revisited. A fence post set into fill without proper compaction will lean within a year, so we dig deeper footings and, where needed, switch to a surface-mount base plate on existing concrete. That’s the kind of detail the site visit exists to catch.

If your iron fence is part of a full Fence Installation in Dana Point plan that includes gates, fencing other sides of the lot, or coordinating with a hardscape project, we scope it all together so the line is consistent and the permits are handled in one pass. We cover all of Dana Point, including 92629, and we coordinate with neighbors in Laguna Niguel, Ladera Ranch, Laguna Beach, and Laguna Hills when a shared property line is involved.

Serving Dana Point, CA – Our Local Coverage Area

We serve Dana Point and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.

Frequently Asked: Iron Fence in Dana Point

A new casement window over a kitchen sink

Get a Free Iron Fence Estimate in Dana Point

Whether your lot is a flat Capistrano Beach parcel or a steep canyon run off Del Obispo, we’ll come out, walk the line, and hand you a line-itemed estimate at no cost. Call (833) 749-3967 and a live person picks up – any hour. We’ll ask a few questions about your property, set a visit, and you’ll know exactly what your iron fence will cost before you commit to anything. Backed by our 730-Day Done Right Promise, from first call to final walkthrough.

Written by the team at Groundwork Construction Co.

Why Dana Point Chooses Groundwork Construction Co. of Newport Beach

We set the standard for iron fence in Dana Point.

No Change-Order Surprises

The written quote you sign is the price you pay. Anything we find mid-job gets priced and approved by you in writing before we touch it.

Licensed & Insured

Fully certified technicians who meet all local and state licensing requirements.

Upfront Pricing

No hidden fees, no surprises. You approve the price before any work begins.

Guaranteed Work

Every repair and installation is backed by our workmanship warranty and satisfaction guarantee.

How It Works in Dana Point

Getting your iron fence project started is simple.

1

Call or Request a Free Estimate

Tell us about your iron fence project and we set up a free visit. No obligation and no hidden fees.

2

Licensed Estimator Visits

A licensed, insured estimator inspects and measures on site, then gives you a clear written price.

3

Scheduled and Done Right

Your crew does the work on the date in your quote, backed by our workmanship warranty and satisfaction guarantee.

What happens when you call

  1. 1
    A real person answersNo phone trees. Talk to a local iron fence pro.
  2. 2
    You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
  3. 3
    We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
  4. 4
    You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.

What Dana Point Customers Say

Trusted by homeowners across Dana Point and surrounding areas.

★★★★★

"The schedule he gave me at the start was accurate to within four days on a three month job. Anyone who has done a renovation knows how unusual that is."

Laura Bennett
★★★★★

"He told me one part of what I wanted was a bad idea structurally and offered an alternative instead of just taking the money."

Angela Wong
★★★★★

"He pulled the permits himself, scheduled every sub and ran the inspections. I made one decision a week and otherwise stayed out of it, which is exactly what I was paying for."

Robert Sullivan

Ideas for every part of the house

Kitchens, baths, roofs, windows, fences and patios: the projects that make a house work better inside and out.

Read our project guides
A new bay window with a cushioned seatA new concrete driveway with a paver borderA stone counter, tile backsplash and open shelf after a kitchen remodelA remodeled hall bathroom with subway tile and a floating vanityA garage converted into a guest room and home officeNew painted shaker cabinets with an organized deep drawer

More services in Dana Point

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Groundwork in Newport Beach

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead walking the house with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A crew arriving at a home with materials and tools

Your Newport Beach team

A local vetted partner works across Newport Beach and the towns around it, to the same written standard as every Groundwork job.

Areas we serve
A worker laying floor protection before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise

Ready for Iron Fence in Dana Point?

Call now for a free estimate, or request one below. Licensed, insured, and here with fast after-hours help in Dana Point.

(833) 749-3967

Request a Free Estimate in Dana Point

Tell us about your iron fence needs. We'll respond within the hour.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Local Service Coverage
Call Now - 24/7 Dispatch