







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Aluminum Fence in North Tustin, CA: What the Job Actually Involves
An aluminum fence installation in North Tustin, CA typically runs $4,000 – $10,000 for a full property-line run, and most jobs are finished in two to four working days once materials land on site. Aluminum suits this enclave well: powder-coated panels that hold their color through Santa Ana wind seasons, rust-free rails on hillside grade, and a lighter footprint than masonry on sloped lots. Call (833) 749-3967 and we’ll walk your lot, measure the runs, and put a written line-item number in your hands before any work is scheduled.
How We Run an Aluminum Fence Job Here, Stage by Stage

Every aluminum fence job follows the same sequence, and knowing it in advance is the difference between a calm project and a stressful one. Here’s the order we work in.
Stage 1: On-site measure and property-line check (one visit, roughly 45 – 90 minutes). We walk the entire run with a tape and a level, note slope changes, and confirm where your recorded property line actually sits. On large-lot North Tustin parcels, a line read off the county assessor map is often a few feet off from the survey. You decide here whether you want us to work from your existing survey or flag where one is needed.
Stage 2: Written estimate and HOA or county submittal (3 – 7 days, mostly waiting). Your written estimate breaks out posts, panels, gates, hardware, finish color, and concrete. If your lot sits in an unincorporated stretch with recorded CC&Rs, or your HOA has an architectural committee, you’ll need to submit the fence drawings. We prepare those drawings and can adjust the design if the committee pushes back on height or color. This is the stage where you pick your spec, and it’s the one that most often adds calendar time.
Stage 3: Utility locates and layout (2 – 3 business days). Before a spade touches soil, 811 utility marking gets scheduled. We then set string lines and mark post holes with paint. You walk the layout with us and sign off on gate placement, which is the single decision most homeowners want to revise after seeing it on the ground. Better here than after concrete.
Stage 4: Demolition and post setting (day 1 – 2 of install). If an old fence comes out, that’s most of a day of demo and haul-off. Post holes run 24 – 30 inches deep, filled with concrete, and the posts cure for at least 24 hours before rails go up. On a typical North Tustin half-acre with 180 – 220 linear feet of fence, expect about 40 to 55 posts.
Stage 5: Panel hang, gates, and final walk (day 2 – 4). Rails and pickets mount to the cured posts, gates get hung and adjusted for swing and latch, and we walk the whole run with you. Any hardware that needs a tweak gets handled on the spot. You’ll also get the finished measurements and product spec sheet for your records.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Choices That Actually Shape an Aluminum Fence
Aluminum isn’t one product. The spec you pick drives both the price and how the fence performs on your specific lot.
- Residential vs. heavy-duty grade: Residential panels with 2-inch pickets run thinner rails and suit standard privacy and boundary lines. Heavy-duty panels with 3-inch pickets and thicker walls cost roughly 25 – 40% more and are what we recommend on hillside lots off Cowan Heights where wind loads are higher.
- Finish: Powder coating in a standard color (black, bronze, architectural white) is the default and holds up well. Custom color matching adds cost and lead time, but a homeowner pairing the fence with new James Hardie siding often wants the trim color to carry through.
- Panel style: Flat-top, pressed-point, and ornamental picket tops are all common. Ornamental styles cost more per panel and add hours to install, but they suit the semi-custom character of many North Tustin homes better than a plain flat-top.
- Gate configuration: A single walk gate costs far less than a double-drive-vehicle gate with heavier posts and hidden hinges. Bay widths drive this decision.
- Post caps and finials: Small money per post, big visual difference. Most buyers add them.
- Rackable panels: On sloped lots, rackable panels let the fence follow grade instead of stepping in ugly stair-steps. If your property line climbs, this is not optional.
What an Aluminum Fence Costs in North Tustin, CA

A standard aluminum fence installation on a typical North Tustin property lands in the $4,000 – $10,000 range. Here’s what pushes a job toward one end or the other.
Linear footage. This is the biggest single driver. A short run around a front yard fences for well under $5,000. Wrapping a full half-acre with front and rear line and a gate typically runs $7,000 – $10,000.
Grade and slope. Rackable panels and deeper post footings add cost on hillside lots. Flat lots sit at the low end.
Old fence removal. Demo, haul-off, and concrete removal from old posts typically adds 10 – 20% to the job. If the existing fence sits on a shared line and the neighbor is splitting it, that math changes.
Gate count and style. Each gate adds a meaningful amount. A double-drive gate with heavy posts adds more.
Permit and survey work. If a county review or new survey is triggered, add time and cost.
What’s included in a written estimate: materials, hardware, concrete, labor, demo of existing fence if quoted, haul-off, and warranty in writing. What’s usually not: survey costs, HOA filing fees, landscaping repair after installation, and anything requiring structural work at a slope transition. Ask us to spell out the exclusions before you sign – we will, and the number on the estimate is what you pay.
See the difference
Before
After
Before
After
Before
AfterHow North Tustin’s Unincorporated Lots Change This Job
North Tustin is an unincorporated enclave, and that single fact shapes aluminum fence work here in ways it doesn’t in a tract city. There’s no city hall issuing your fence permit; you’re dealing with Orange County review, and the lots are large and often decades into their own history. Many homes here date to the 1950s through 1970s, and it isn’t unusual on the hillside streets off Newport Avenue to discover an old fence line sitting several feet off the recorded property line, or a previous owner’s patio enclosure that was never permitted. We check for both before quoting.
Hillside grade also matters. Lots in the foothills of the Santa Ana Mountains see real slope, and winter rain runoff needs a fence that won’t undermine at the base. On the driest stretches of the year, Santa Ana winds push against fence panels in a way that makes post depth and panel grade non-negotiable. We size footings for the exposed, windy lots and rack panels to follow grade rather than stepping them. Spacious lots also mean long runs and gate placements that need walk-throughs, so you’ll get to walk the layout before a single post goes in. If you’re partway through a wider exterior refresh, this pairs naturally with a full Fence Installation in North Tustin plan, and homeowners often pair new fence lines with Driveway Repair & Replacement in North Tustin or fresh Patios, Walkways & Pool Decks in North Tustin hardscape. We cover all of North Tustin and surrounding communities, and you can see our full Fence Installation work here.
Serving North Tustin, CA – Our Local Coverage Area
We serve North Tustin and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions: Aluminum Fence in North Tustin

Most aluminum fence jobs we run in North Tustin take two to four working days of on-site installation, plus a one-to-two week window for estimate, HOA or county submittal, and utility locates. Complex hillside lots with heavy slope or terrain changes can stretch the install to four or five days. Call (833) 749-3967 for a timeline specific to your lot.
North Tustin is unincorporated, so fence permitting runs through Orange County review rather than a city building department, and whether your specific fence triggers a permit depends on height, location on the lot, and whether your property has recorded CC&Rs. Front-yard and corner-lot fences are the most likely to need submittal. We’ll walk you through the actual requirement for your property on the estimate visit; call (833) 749-3967 to set that up.
Yes, and it’s the right choice for most hillside lots here. Rackable panels let the fence follow grade smoothly rather than stepping down in vertical jumps, and deeper concrete footings handle the wind loads you get on exposed North Tustin slopes. We size the spec to the grade on your estimate visit – call (833) 749-3967 and we’ll walk the slope with you.
A typical aluminum fence installation in North Tustin runs $4,000 – $10,000 depending on linear footage, grade, gate count, and whether an old fence needs removal. Short runs come in lower; full half-acre wraps with heavy-duty panels and a double gate sit near the top of that range. Call (833) 749-3967 for a written line-item estimate on your exact run; estimates are free.
No. The written estimate you sign is the number you pay, and we don’t issue change orders for scope we quoted. The only things that would move the price are things you add after signing, and we spell those out in writing before doing the work. Every aluminum fence project we install carries our 730-Day Done Right Promise – if it isn’t done right, we make it right. Call (833) 749-3967 to schedule your free estimate.
Get a Free Estimate on Your Aluminum Fence in North Tustin
Call (833) 749-3967 to schedule a free on-site estimate for aluminum fence installation in North Tustin. On the call, we’ll ask about your lot size, existing fence, gate needs, and timing, and we’ll get a measure visit on the calendar. You’ll get a written line-item quote with materials, gate hardware, and finish color spelled out, plus a 730-Day Done Right Promise on the workmanship. A live person answers around the clock – no voicemail.
Written by the team at Groundwork Construction Co.












