







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
PGT Windows & Doors in Newport Beach: What to Know First
We install and replace PGT windows and doors in Newport Beach as an independent PGT service provider, and most single-room projects wrap up in a few days once materials are on site. Typical jobs land between $4,500 and $15,000 for standard replacement and $8,000 to $25,000 for impact-rated systems, all quoted upfront before we start. Trips to the permit window and final inspection are included in that number – what you see is the number you pay.
This page is for Newport Beach homeowners who already own PGT products and want them repaired, matched, or replaced correctly – not for someone shopping a generic window quote. Call (833) 749-3967 and a live person answers, day or night, to set up your free estimate.
How PGT Products Fail – and How We Fix Them
PGT builds solid products, but they’re not immune to coastal conditions. Here’s what we actually see on PGT jobs across Newport Beach, and how we handle each one.
- Fogged insulated glass units on PGT WinGuard impact windows. The most common call we get. On the inland-facing elevations of homes in Newport Heights and Dover Shores, a failed seal lets moisture between the panes, and you’ll see a hazy patch that doesn’t wipe away. The vinyl frame is usually fine – only the IGU needs replacing, which saves real money over a full unit swap. We match the glass spec so the impact rating stays intact.
- Weeping or sticking sliding patio doors. PGT sliding doors in coastal homes take salt air and blown grit in the lower track, and the rollers flatten over time. The door drags, then stops latching clean. We pull the panel, replace the roller assemblies with quality aftermarket parts that fit the original extrusion, and re-set the track. It’s a half-day fix, not a door replacement.
- Weatherstrip and sweep deterioration. The brush sweep at the bottom of a PGT door and the perimeter weatherstrip break down faster on the ocean side of Newport Beach than anywhere inland. Once they go, you get drafts and wind-driven rain at the threshold. We replace the sweep with the OEM profile so the sill still drains the way it was designed to.
- Water intrusion at the sill or head. Often misdiagnosed as a failed unit when the real cause is the original install – a missing sill pan or a head flashing that was never detailed correctly. On PGT replacements we open the rough opening, confirm the flashing and pan are right, then re-set the unit. A new window dropped into a bad opening will leak again.
- Star-dial or builder-grade hardware that fails before the glass does. On older PGT aluminum and vinyl lines, the lock and keeper wear out first. We test every latch after the glass work, and replace the hardware with a direct-fit match rather than a universal lock that won’t align.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Our PGT Windows & Doors Process
- 1
Free estimate and on-site diagnostics. We look at the whole assembly, not just the fogged pane or the dragging door. You get a written line-item quote before anything is ordered.
- 2
OEM vs. quality aftermarket decision. If an OEM part is available and worth the wait, we tell you. If an aftermarket part performs just as well or better and keeps the job on schedule, we say that too. No upselling a full unit when a repair will last.
- 3
Warranty-safe work. We document the series and condition before we touch anything, so an active PGT warranty isn’t voided by our repair. If it looks like a covered claim, we say so first.
- 4
The install or repair. Background-checked, uniformed technicians. Drop cloths down, old glass or panels hauled out the same visit.
- 5
Water test and operation check. We verify the latch, the slide, the drain and the seal before we call it done – on impact work, that means we confirm the opening actually sheds water.
- 6
730-Day Done Right Promise. Every PGT job is backed in writing. If something isn’t right, we come back and make it right.
See the difference
Before
After
Before
After
Before
AfterWhat PGT Windows & Doors Costs in Newport Beach

Straight numbers for the jobs we run most in Newport Beach:
| Project | Typical Range |
|---|---|
| Window Replacement | $4,500 – $15,000 |
| Impact Window Installation | $8,000 – $25,000 |
| Door Installation | Quoted per opening |
| Sliding & Patio Doors | Quoted per opening |
What moves the number: unit count, whether you’re matching an existing PGT series, impact vs. standard glass, second-story access, and whether the rough opening needs flashing or sill work. A fogged IGU repair costs far less than a full unit. Full replacement on a typical Newport Beach home most often lands between $4,500 and $15,000, and impact work runs $8,000 to $25,000. Ask about our $1,000 off projects over $10,000 and 0% financing for 18 months. Call (833) 749-3967 for an exact quote – estimates are free and priced upfront.
Why Newport Beach Homeowners Call Groundwork Construction Co. of Newport Beach for PGT Work
The 730-Day Done Right Promise is the reason most people call back. If the work isn’t right, we make it right – one of the longest workmanship guarantees in the residential construction space, and it’s written, not implied. Calls are answered by a live person 24/7, so you’re not leaving a voicemail and waiting until Monday. Our technicians have up to 12 years of experience, arrive in uniform, and are background-checked on every project.
We work with a curated set of brand partners across every trade – Andersen and Marvin for windows, KraftMaid and Kohler inside the house, GAF on roofs, Master Halco for fencing – so when a PGT job turns into a broader fix, you’re not chasing a second contractor. From foundation to finish line, built to last and backed in writing. Call (833) 749-3967.
FAQs

Does repairing my PGT windows void the PGT warranty? No, when the repair is done to spec – and we document the series and condition before we start so an active claim stays intact. If your issue looks like a covered manufacturer defect, we’ll tell you to file the claim before we bill you for anything.
Can you match my existing PGT series when I only need one window or door? Usually yes. Most commonly we match the glass spec and profile on a single failed unit rather than replace a whole wall. Call (833) 749-3967 and have the series name or a photo ready – estimates are free.
Should I repair or replace a fogged PGT window? If only the glass is fogged and the frame is sound, replacing the insulated glass unit is cheaper and keeps the impact rating. If the frame is warped or the opening leaks, replacement is the better spend. We’ll tell you which one you actually need.
How fast can you get to a PGT window or door job in Newport Beach? Most non-emergency projects get a free estimate quickly once you call, with the work scheduled around material lead times. Impact glass and special-order series take longer to arrive. Call (833) 749-3967 to get on the schedule.
Do you pull the permits for window and door replacement? Yes. Permits are pulled and inspections passed as part of the project, and there’s no change order for that work.
Written by the team at Groundwork Construction Co. of Newport Beach, serving Newport Beach and nearby areas.












