







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Chain Link Fence in Tustin, CA: What the Job Actually Involves
A chain link fence in Tustin typically runs $3,500 to $9,000 installed, and most residential yards are finished in one to three days. That covers setting galvanized or vinyl-coated posts in concrete, hanging the mesh, and hanging a gate that swings true. The number lands where it lands based on linear footage, height, gauge, coating, and how many gates you want. Call (833) 749-3967 for a free on-site estimate so you’re pricing your actual yard instead of a ballpark.
How We Build a Chain Link Fence, Stage by Stage

Chain link is a fast fence, but the speed depends entirely on the front end. Here’s the sequence we run, and what you’ll be deciding at each stop.
1. Layout and utility locating (day one, first two hours)
We walk the property line with you and mark corners, gates, and any turn-in points. Before a single post goes in, we call for utility locating and confirm the markings are current. You’ll decide the exact fence line here, and this is the one place where you shouldn’t rush. A foot one way or the other can mean a gate that opens into a slope or a fence sitting on your neighbor’s dirt.
2. Demolition and prep (half a day, if there’s a fence coming out)
Old fence comes down, posts get pulled, and hardware gets hauled off. If the old posts are set in concrete, we dig the footings out rather than snapping them off at grade. Homeowners who skip that step end up with a new fence over buried debris that works loose in a couple of winters. You’ll decide whether anything stays: a serviceable gate, a section you want to keep.
3. Post setting (day one and into day two)
Line posts go every 8 to 10 feet. Corner, end, and gate posts get set deeper and in more concrete because they carry the tension of the whole run. This is where chain link earns or loses its longevity. Posts set too shallow lean within a year under Santa Ana wind loading, and the fix is a rebuild, not a tweak.
4. Framing and mesh (day two)
Top rail, tension bands, and mesh get pulled and tied off. Tensioning is a feel job: too loose and the fabric sags and waves, too tight and it fatigues the wire at the bands. You’ll pick gate hardware here, hinges and latches and whether you want a self-closing setup.
5. Gates, cleanup, and walkthrough (day two or three)
Gate frames get hung, swing tested, and adjusted for grade. We clear the site and walk the fence with you end to end, checking tension by hand and testing every latch. If there’s an inspection, that happens before final walkthrough, not after.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Choices That Actually Change the Fence
Chain link isn’t one product. The variables below are the ones with real consequences, and each has an honest trade-off.
- Gauge (wire thickness). 11.5-gauge is the residential standard and holds up fine for most yards. 9-gauge is heavier and noticeably stiffer, better for long runs and homes that take hard wind. It costs more per foot; the trade-off is that thinner wire on a long exposed run will show waves sooner.
- Coating. Galvanized is the budget choice and genuinely durable in Tustin’s dry air. Vinyl-coated in black or green looks better and hides the wire, and the coating resists the abrasion that eventually rusts bare galvanized. The trade-off: coated costs more up front and the coating can chip at cut ends if it’s poorly done.
- Height. Four feet reads as a boundary marker; six feet reads as a barrier. Height drives cost faster than footage because taller fabric takes more tension and beefier posts.
- Gates. Walk gates are simple. A double drive gate needs stronger posts and better hardware, and it’s where most cheap fence jobs fail first.
- Top rail and tension wire. A full top rail and a bottom tension wire keep the fabric from sagging and from lifting at the bottom. It’s an add-on that buyers sometimes skip and later regret.
What a Chain Link Fence Costs in Tustin, CA

Expect $3,500 to $9,000 for a residential chain link fence in Tustin, installed. The low end is a modest perimeter with one walk gate in standard galvanized; the high end is a larger yard, taller fence, coated mesh, and multiple gates.
Five things push the number:
- Linear footage. The biggest driver. A 100-foot run and a 250-foot run are different jobs, not different quotes on the same job.
- Height and gauge. Going to six feet with 9-gauge adds real cost in both material and post size.
- Gates. Each gate is its own small build. Drive gates with reinforced frames add the most.
- Site conditions. Slopes, rock, or an old fence that has to be fully excavated from concrete footings add labor.
- Permits and HOA approval. Some Tustin properties need a permit and most HOAs review fence height and style before work starts. We pull permits and pass inspections, and we’ll tell you when it’s required rather than assume.
A written estimate should list footage, height, gauge, coating, gate count and hardware, post footing depth, removal, and permit costs. What it typically doesn’t include: landscaping repair along the fence line, moving irrigation lines or sprinkler heads, or any grading. We’ll flag those before work begins so there’s no change-order surprise. Upfront pricing means the number you see is the number you pay.
See the difference
Before
After
Before
After
Before
AfterWhat Tustin Homes Specifically Do to This Job
Tustin is two housing markets running side by side, and they fail differently. In the 92780 flats, you’re working on 1950s to 1970s single-story ranches, and the old fence lines there are usually at the end of their life. We dig out original posts set in crumbling concrete, and we run into old galvanized irrigation and aging electrical in the same dirt. Those show up as hidden obstacles that add time.
Out in 92782, Tustin Ranch and Columbus Square, the housing is newer, but the rules are stricter. Columbus Square sits on the former MCAS Tustin land, and any project near the old blimp hangar footprint can trigger extra environmental and historical review. Contractors here really do joke that you need a separate permit to sneeze near the hangars. That doesn’t usually affect a residential chain link fence, but it does mean the city reviews plans carefully, and we plan for it. Those same Santa Ana winds that drive ember risk from the foothills are what lean a poorly set fence; we set posts for that loading, and we check state licensing and insurance before anyone is on your property.
Questions We Get About Chain Link Fence in Tustin

How long does a chain link fence take to install in Tustin?
Most residential chain link fences in Tustin take one to three days from start to finished walkthrough. Small yards with one gate are often done in a day-plus; larger runs with multiple gates and an old fence to remove take the full three. Weather and inspection scheduling can stretch it slightly. Call (833) 749-3967 and we’ll give you a realistic date range for your specific yard.
Do I need a permit for a chain link fence in Tustin?
It depends on height and location, and we verify it for your property rather than guess. Whatever the city requires, we pull the permit and pass the inspection, and we’ll tell you upfront if it’s needed. Call (833) 749-3967 to schedule a free estimate and we’ll sort out the permit question at the same visit.
Will a chain link fence cost change once work starts?
Not with a written line-item estimate, and not with our upfront pricing. The number you see is the number you pay. If we hit something unexpected – buried concrete, an unmarked line – we stop and tell you before anything changes. Call (833) 749-3967 for a free estimate.
Can you install a chain link fence without tearing up my yard?
Yes, in most cases. We hand-dig or use a compact auger to keep turf disturbance to the post holes. If your fence line crosses a patio, planting bed, or a driveway being resurfaced, homeowners often pair this with Concrete Driveways & Concrete Work in Tustin or Asphalt Driveways & Resurfacing in Tustin so the whole boundary gets addressed at once. Call (833) 749-3967 for a free estimate.
What warranty comes with a chain link fence?
Every chain link fence we install is backed by our 730-Day Done Right Promise – if it’s not done right, we make it right. That covers our workmanship for a full two years. Call (833) 749-3967 for details on your estimate.
Serving Tustin, CA – Our Local Coverage Area
We serve Tustin and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Get a Free Chain Link Fence Estimate in Tustin
We’ll come out, walk the fence line, and hand you a written, line-item estimate for your chain link fence in Tustin. No pressure, no vague number. We answer calls live, 24/7, so you’re never stuck leaving a voicemail. If the fence is part of a larger project, this fits right into our Fence Installation service, and you can read the wider scope on our Fence Installation in Tustin page. We work throughout Tustin, and estimates are free. Call (833) 749-3967.
Written by the team at Groundwork Construction Co. of Newport Beach.












