







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Custom & Geometric Windows in Tustin: What They Run and How Long They Take
Custom & geometric windows in Tustin typically cost $8,000 – $25,000 installed as a project, or $4,500 – $15,000 when a single elevation gets reworked with a few shaped units. Expect 4 – 7 weeks from template to trim-out: 1 – 2 weeks for measurement and fabrication of arched, radius, or trapezoid units, then 2 – 4 days on site. Call (833) 749-3967 for a free estimate on the actual opening you have in mind.
These aren’t stock units pulled off a shelf. Custom & geometric windows means fixed and operable shapes – arches, half-rounds, eyebrows, trapezoids, octagons, circles, angled corner glazing – built to your rough opening and the dimension your wall actually wants.
The process, stage by stage, from first measurement to final seal

Every geometric window comes down to the same problem: the shape has to match the wall, and the wall almost never matches the plan. Here’s the sequence we run.
Stage 1 – Site measure and shape template (day 1, 2 to 3 hours)
We measure the rough opening at multiple points, check how plumb and square the existing frame is, and confirm the wall assembly behind it – stucco thickness, sheathing, any structural header work the new shape requires. On a radius or arch, the fabricator needs an accurate template, so we build one on site. This is where you decide fixed versus operable, and which elevation gets the shape.
Stage 2 – Product selection and order (days 1 – 3)
You pick the frame material, glazing package, and finish. We finalize the quote as a line-item written estimate – unit cost, lead time, install labor, trim and flashing, permit – so the number you see is the number you pay. Once you sign, the order goes to the manufacturer. Fabrication lead time for shaped units typically runs 1 to 2 weeks.
Stage 3 – Permit and HOA review (runs parallel, roughly 1 to 2 weeks)
Shaped and oversized windows usually need a permit in Tustin, and the header or framing change often draws a plan check. If you’re in an HOA, exterior appearance review goes in at the same time. We handle the submittal and pull the permit before anyone touches a wall.
Stage 4 – Demo, rough framing, install (2 to 4 days on site)
Day one is removal and prep: old unit out, opening cleaned, any dry rot or damaged sheathing addressed, new header or trimmer framed if the shape demands it. The new unit sets the following day, shimmed, leveled, flashed, and sealed. Geometric units are heavier and more awkward than rectangles, so on second-story work we plan the lift in advance.
Stage 5 – Trim, finish, inspection (days 3 – 5)
Interior and exterior trim go on, the reveal gets finished, and we call for the inspection. You walk the job with us before we close it out – operation, seal, sightlines, and cleanup.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The options you’ll choose between – and the honest trade-off on each
Most of the cost conversation comes down to four or five decisions. Here’s what each one does to the timeline and the number.
- Frame material: Vinyl is the value play, but complex shapes and radii are limited in what vinyl profiles can hold, and color choices stay narrow. Aluminum handles true curved and angled geometry well and suits the Mediterranean stucco homes in Tustin Ranch, at a higher unit price. Wood-clad gives the best finish detail and longest service life, but it’s the most expensive and needs periodic exterior care.
- Fixed versus operable: A fixed geometric unit – an arch transom, an eyebrow over a slider – is significantly less expensive than an operable one. Operable shaped windows need custom hardware and careful alignment; if you want it to open, it’s worth paying for. If it’s there for light and proportion, go fixed.
- Glazing package: Standard dual-pane is the baseline. Upgrading the glazing to a fire-rated assembly makes sense on elevations facing the foothills and ember exposure – a real factor in Tustin. Low-E coatings cut solar heat gain, which matters on west-facing glass.
- Grille pattern and muntin layout: A true divided-lite or simulated divided-lite pattern on a curved unit is a custom fabrication. It’s the difference between a window that reads as original to the house and one that looks added on. Expect a meaningful bump in unit price for true divided lites.
- Trim and finish: Matching existing stucco returns versus adding a trim band; interior casing style and stain or paint. Small line items, big visual impact.
We work with ES Windows, ECO Window Systems, and Mr-Glass among others, so you see real options side by side rather than a single catalog. Choose the brand partner that fits the shape and the budget, not just the one on the shelf.
What Custom & Geometric Windows costs in Tustin, CA

Plan on $8,000 – $25,000 for a multi-unit custom & geometric windows project, and $4,500 – $15,000 for a smaller scope where one or two shaped openings are reworked. These match our standing impact-window and window-replacement ranges because the labor and fabrication sit in the same bands.
What pushes the number to the low versus high end
- Shape complexity: A half-round or arch in a standard size is the low end. Custom radii, non-standard trapezoids, and multi-unit assemblies with mechanically mulled shapes sit at the top.
- Count and size: One shaped unit versus a whole elevation of them. Each additional unit adds both product and install time.
- Structural work: If the new shape requires a larger header, reframing, or shear-panel repair, that’s rough framing on top of the window.
- Material grade: Vinyl to wood-clad can swing a job substantially on the same footprint.
- Permit scope: A like-for-like swap is a simpler permit than a size change that triggers plan check and structural review.
What’s in a written estimate versus what usually isn’t
A written line-item estimate from us covers the units, fabrication, install labor, flashing and sealant, interior and exterior trim, permit fees, and haul-away. It doesn’t cover dry rot or hidden framing damage discovered at demo – we flag that as a defined line if it exists and won’t surprise you with a change order mid-job. Stucco patching beyond the immediate opening and interior drywall repair beyond the trim line also get spelled out separately so nothing lands on the final invoice as a surprise.
See the difference
Before
After
Before
After
Before
AfterWhat Tustin homes specifically do to this job
Tustin is a tale of two build eras, and it changes the work. In the 92780 ZIP, the 1950s – 1970s single-story ranches and dingbats have original galvanized plumbing, thin stucco, and aging electrical panels – so a shaped window often comes with rough framing we didn’t expect, and we plan for it. In 92782, Tustin Ranch and Columbus Square were built over the former Marine Corps Air Station on some of Orange County’s most tightly regulated former military land, with newer development standards and, in places, extra environmental and historical review. Contractors here joke that you need a permit just to sneeze near the blimp hangars. On top of that, the semi-arid climate and Santa Ana wind events drive ember exposure from the foothills, and winter rains find poorly drained stucco and aging flat roofs. That’s why fire-rated glazing and flashing corrections come up more often than you’d expect on custom & geometric windows in Tustin.
We cover all three ZIPs here – 92781, 92780, 92782 – and the surrounding areas of North Tustin, Santa Ana, Irvine, and Orange. If the project grows into a bigger scope, this fits neatly inside a full Windows & Doors in Tustin plan, and homeowners often pair this with Concrete Driveways & Concrete Work in Tustin or with Asphalt Driveways & Resurfacing in Tustin to finish the front of the house. See our Windows & Doors service for the full range, or the Tustin service-area page for coverage details.
Serving Tustin, CA – Our Local Coverage Area
We serve Tustin and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked – Custom & Geometric Windows in Tustin

Plan for 4 to 7 weeks total: 1 to 2 weeks for measurement, fabrication, and permit, then 2 to 4 days on site. Call (833) 749-3967 for a timeline on your specific opening.
Yes, in most cases. Shaped units, size changes, and any structural header work typically require a permit, and oversized or non-standard shapes often trigger plan check. We pull the permit and pass inspection as part of the job. Call (833) 749-3967 to talk through your scope.
Often yes, when the new unit matches the existing rough opening. If the shape is larger or differently proportioned, a header or framing change may be required, and that’s where structural scope comes in. We tell you which case you’re in after the site measure. Call (833) 749-3967 for a free on-site look.
Expect $8,000 – $25,000 for a multi-unit project and $4,500 – $15,000 for a smaller scope with one or two shaped openings. Shape complexity, count, material grade, structural work, and permit scope move the number. Call (833) 749-3967 for an exact written quote – estimates are free.
Our workmanship is covered by the 730-Day Done Right Promise – if it’s not done right, we make it right. Manufacturer warranties on the units run alongside it and vary by brand partner. Call (833) 749-3967 to review the coverage on your chosen product.
Get a free estimate for custom & geometric windows in Tustin
Call (833) 749-3967 to schedule a free on-site estimate and design consult. A live person answers around the clock, so you’re never stuck waiting until Monday. We’ll measure the opening, walk you through the shape and material options, and hand you a written line-item quote with no surprises – covered by the 730-Day Done Right Promise. Estimates are free.
Written by the team at Groundwork Construction Co.












