







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Door Installation in Irvine, CA: What It Actually Takes
Door installation in Irvine typically runs $650 to $3,200 per opening depending on whether you’re hanging a pre-hung interior slab or cutting in a new exterior entry with sidelites, and it’s usually a one to two day job once the door is on site. The part that stretches the schedule here isn’t the carpentry – it’s the HOA architectural review that has to sign off on the style, color and hardware before anyone touches your frame. Call (833) 749-3967 and we’ll walk you through what your village’s committee is likely to approve before you spend a dime on a door.
How We Run a Door Installation, Stage by Stage

Five stages, and you make a decision at each one. Here’s the honest sequence.
Stage 1 – Measure and application (week 1). We measure the rough opening, check the existing frame for rot or settling, and photograph the current door for your HOA submittal. You’ll need to pull your village’s approved color palette and style list, usually from the management company’s design guidelines packet. This is the stage where jobs die if the paperwork is sloppy, so we handle the submittal drawings and spec sheet for you.
Stage 2 – ARB approval (typically 2 to 6 weeks). Architectural review committees in Irvine meet on their own calendar, and some villages are faster than others. We don’t control that clock, and any contractor who promises you a door next Tuesday hasn’t done many jobs inside these communities. You decide here: do you match the original door exactly to speed approval, or submit a different style and accept the back-and-forth?
Stage 3 – Demo and prep (day 1, 3 to 5 hours). Old door and frame come out, the rough opening gets checked for plumb and square, and any damaged framing or sill gets replaced before anything new goes in. You decide whether to replace the threshold and trim at the same time – it’s cheaper to do now than to call us back.
Stage 4 – Hang, shim, seal (day 1 into day 2). The new unit goes in, gets shimmed plumb, and we foam and flash the perimeter. Exterior doors get new weatherstripping and a sill pan. You decide on hardware and finish at this point if you haven’t already, and we confirm the swing direction one last time before the hinges are set.
Stage 5 – Finish and final inspection (day 2, plus cure time). Trim, casing, caulk and paint touch-up. If your job involves a structural change or a new opening, the city inspection happens here. You get a walkthrough and the written warranty paperwork the same day.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Actually Choose Between
Most of the decisions on a door come down to four or five real forks in the road. Here’s what each one costs you in money and in maintenance.
- Fiberglass vs. steel vs. wood exterior. Fiberglass holds up best against Irvine’s dry summers and won’t dent or rust; it’s the mid-to-high end at roughly $1,200 to $2,800 installed. Steel is the budget choice at $650 to $1,400 and dents over time. Wood looks the best and needs the most repainting.
- Pre-hung vs. slab. Pre-hung units come with the frame attached and install faster – the standard choice when you’re replacing the whole assembly. A slab going into an existing sound frame saves money but only works if the old frame is straight.
- Solid core vs. hollow interior. Solid core doors run $250 to $600 installed each, feel heavier, and quiet down a hallway or home office. Hollow core is $150 to $350 and fine for closets and pantry.
- Hardware finish and function. Matte black and brushed nickel are the two finishes that clear most Irvine HOA palettes without a fight. Handlesets run $80 to $400 depending on grade; keyed entry sets with matching deadbolts add $100 to $250.
- Glass and sidelites. Adding glass to an entry raises the price by $400 to $1,200 but brings in light the way a darker tract entry never will. Keep in mind Irvine’s review committees are pickier about visible glazing patterns than about the door itself.
We work with Andersen and Pella on exterior units and standard millwork brands for interior doors, so the catalog isn’t limited to what a local yard happens to stock.
What Door Installation Costs in Irvine, CA

Plan on $650 to $3,200 per door for most Irvine homes, with a typical single exterior entry landing in the $1,400 to $2,600 range and interior door swaps at $250 to $650 each. Here’s how a written estimate breaks down and what pushes a job to the low or high end.
| Line Item | Typical Range |
|---|---|
| Interior door replacement (per door) | $250 – $650 |
| Exterior entry door, standard | $1,200 – $2,600 |
| Exterior entry with sidelites or glass | $1,800 – $3,200 |
| Hardware and finish upgrade | $80 – $400 |
| HOA submittal drawings (where required) | $0 – $250 |
| Repair of rotted framing or sill | $150 – $700 |
Four variables move that number the most. Size and opening – a standard 36-inch door is cheaper than a custom-width or a new rough opening cut into a wall. Existing condition – if the frame behind the trim is soft from a decade of a leaking sill, the repair adds a few hundred dollars. Material grade – fiberglass and solid wood push toward the top of the range. Permit scope – a like-for-like door swap often needs no permit, but cutting a new opening or changing structural framing does, and that adds fees and inspection time.
Every written estimate we hand you is line-item and fixed – no change orders after demo. If we open a wall and find something the estimate didn’t cover, we show you and quote it before we proceed, not after.
See the difference
Before
After
Before
After
Before
AfterWhat Irvine Homes Specifically Do to a Door Job
Irvine isn’t Santa Ana or Tustin. Nearly all of the city was built out by the Irvine Company from the 1970s forward, which means almost every door we touch sits inside a village HOA with its own architectural review committee and color-and-material palette. In Woodbridge and Northwood, that usually means replacing a 40-year-old door with something that matches the village’s approved style list; in Turtle Rock and the newer Great Park buildouts, it means working around the specific trim profiles the builder used so the replacement doesn’t stand out from the neighbors. Homeowners in ZIPs 92602, 92604, 92617 and 92619 all live under this. The failure mode we see most isn’t rot – it’s failed weatherstripping and sun-baked finish on south- and west-facing doors, because Irvine’s long dry season bakes an exterior slab for eight months before the first rain hits. If you’re also replacing fences around the property, homeowners often pair this with Chain Link Fence in Irvine or Vinyl Fence in Irvine to keep the whole exterior consistent for the review committee. For the wider envelope, that work usually folds into a Windows & Doors in Irvine project where doors, windows and trim get matched in one submittal.
Serving Irvine, CA – Our Local Coverage Area
We serve Irvine and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Door Installation in Irvine

The physical install takes one to two days per door, but the full timeline from order to final walkthrough typically runs four to nine weeks in Irvine because of HOA architectural review. Call (833) 749-3967 and we’ll tell you how quickly your specific village’s committee moves.
Yes, in almost every Irvine village you do, and the approval covers style, color, hardware finish and visible glass. We prepare the submittal drawings and spec sheet for you – call (833) 749-3967 to start the paperwork.
A like-for-like door replacement in the same opening usually does not, but cutting a new opening or altering structural framing does, and we pull that permit and pass the inspection for you. Call (833) 749-3967 and we’ll confirm your specific scope.
Most Irvine door installations run $650 to $3,200 per opening, with interior doors at the low end and a glass-lite exterior entry at the high end. Call (833) 749-3967 for an exact line-item quote – the on-site estimate is free.
Every door we install is backed by our 730-Day Done Right Promise – if the install isn’t right, we make it right, for two full years. Call (833) 749-3967 to schedule your free estimate and see the warranty in writing before you commit.
Ready for a Door That Fits the Community
We come out to Irvine for a free on-site estimate on door installation, measure the opening, check the frame and walk you through which styles your village’s committee is most likely to approve. You’ll leave the call with a fixed line-item number and no surprises. Reach us at (833) 749-3967 – a live person answers, any hour – and you can see the full scope of Windows & Doors work we do while you have us there.
Written by the team at Groundwork Construction Co. of Newport Beach.












