







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Metal Roofing in North Tustin, CA: What the Job Actually Involves
Metal roofing in North Tustin typically costs between $15,000 and $40,000 installed, and most homes take two to four weeks from tear-off to final inspection. The work means stripping the existing roof to the deck, fixing or replacing sheathing, then installing standing-seam panels or a stamped metal system with the right underlayment and flashing for the slope. Call (833) 749-3967 for a free on-site estimate. We’ll walk the roof, check the deck condition, and give you a written line-item quote before you commit to anything.
How a Metal Roofing Project Runs, Stage by Stage

The sequence matters more than the sales pitch. Here’s the actual order of work on a North Tustin metal roofing job and what you’ll be deciding along the way.
Stage 1: Roof inspection and scope (day 1)
We get on the roof, measure the square footage, check the deck for rot, and photograph every trouble spot. On these large-lot custom homes that means paying attention to the low-pitch and flat sections that were added over the decades. You’ll get a written scope with line items, not a lump sum. This is where you decide whether the whole roof goes metal or just the pitched sections.
Stage 2: Permits and material order (days 2 through 10)
Because North Tustin is unincorporated, the permit runs through Orange County rather than a city building department. We handle the submittal and the inspection scheduling. Panel lead times vary by color and profile, so this stage is often the longest wait. You’ll finalize your panel color, gauge, and finish here.
Stage 3: Tear-off and deck prep (2 to 4 days)
Old roofing comes off down to the sheathing. Any soft decking gets replaced. This is also when we confirm the flashing details around chimneys, skylights, and valleys. If the deck reveals something unexpected, you hear about it before we keep going, not after.
Stage 4: Underlayment and panel installation (5 to 10 days)
High-temp underlayment goes down first, then the panels are cut and set. Standing seam gets its concealed fasteners and clips; stamped systems get their fastening pattern. Panels are measured and cut on site to fit your roof’s geometry, which on custom homes is rarely square.
Stage 5: Flashing, trim, and final inspection (2 to 3 days)
Ridge caps, edge metal, and all penetrations get sealed and finished. Then the county inspector signs off. We do a final walkthrough with you, and the work is covered by our 730-Day Done Right Promise. If something’s not right, we make it right.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between
Metal isn’t one product. What you pick changes both the look and the price, and the trade-offs are real.
- Standing-seam steel – concealed fasteners, clean vertical lines, the most common upgrade on North Tustin custom homes. Costs more up front but lasts longest and needs the least maintenance.
- Stamped or shingle-profile metal – mimics tile or shake at a lower price point and lighter weight. The trade-off is visible fasteners and a shorter finish life than true standing seam.
- Aluminum panels – a good fit for homes near the foothills because aluminum resists corrosion better than steel. Pricier material, and you’ll want to confirm the panel thickness suits the slope.
- Finish and color – a Kynar-type painted finish holds color far better than a basic acrylic. Choose the finish grade for sun exposure, not just the swatch.
- Gauge – heavier gauge resists denting from wind-blown debris, which matters on exposed hillside lots. Lighter gauge saves money but shows wear faster.
We’ll bring samples to the estimate so you’re comparing real panels, not catalog photos.
What Metal Roofing Costs in North Tustin, CA

Plan on $15,000 to $40,000 for a full metal roof installation here. That range covers most homes, but a handful of things push a job toward one end or the other.
- Roof size and complexity – more squares and more valleys, hips, and dormers mean more labor and more cut panels.
- Existing roof condition – a sound deck means a straightforward tear-off. Rot, failed sheathing, or a second layer underneath adds days and dollars.
- Material grade and gauge – standing seam in aluminum or heavier steel lands near the high end; stamped metal near the low end.
- Access and slope – steep pitches and tight side-yard access slow the crew down and raise labor.
- Permit and inspection scope – county review on a home with prior non-conforming work can add plan-check time and corrections.
A written estimate from us covers tear-off, deck repair up to the agreed allowance, underlayment, panels, flashing, trim, permit, and cleanup. What it typically doesn’t cover: structural framing repairs beyond the deck, skylight replacement, or gutter work, which we price separately. The number you see is the number you pay. Call (833) 749-3967 for an exact quote, and ask about the $1,000 off projects over $10,000 and 0% financing for 18 months.
See the difference
Before
After
Before
After
Before
AfterWhat North Tustin Homes Specifically Do to This Job
North Tustin is an unincorporated enclave of large-lot custom and semi-custom homes, and that shapes the work in ways a tract neighborhood never does. Most projects here run through Orange County’s unincorporated permitting and hillside standards rather than a city hall, and county plan review adds time you won’t see on a typical replacement elsewhere. On the hillside streets off Newport Avenue and up in Cowan Heights, we routinely find older unpermitted patio enclosures and added rooms from prior decades. Those discoveries can trigger corrections before a roof can be signed off, so we look for them before we bid. The housing stock is mostly 1950s to 1970s ranch and custom homes with original framing, and many have low-pitch or flat sections that need the right profile and underlayment. Sitting in the foothills of the Santa Ana Mountains, these roofs also take hot, dry summers and Santa Ana wind events, so we spec heavier gauge and wildfire-resistant detailing where it counts. It’s all part of a full Roofing in North Tustin scope, and homeowners in North Tustin often pair the metal roof with Window Replacement in North Tustin or Impact Windows & Doors in North Tustin to finish the envelope. You can see our wider Roofing work for the full picture.
Serving North Tustin, CA – Our Local Coverage Area
We serve North Tustin and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked: Metal Roofing in North Tustin

Most North Tustin metal roofing jobs take two to four weeks from tear-off to final inspection, with panel lead times sometimes adding a week or two before work begins. County permitting accounts for part of that timeline.
Yes. Because North Tustin is unincorporated, the permit runs through Orange County, and inspections are required for a roof replacement or metal installation. We handle the submittal and schedule the inspections for you.
In most cases, yes. Metal is lighter than tile, so the existing framing usually carries it without structural changes. We check the deck and framing during the inspection and tell you up front if anything needs reinforcing. Call (833) 749-3967 for an exact quote.
Expect $15,000 to $40,000 installed, depending on roof size, panel type, gauge, and existing condition. A standing-seam job on a complex custom roof lands near the top; stamped metal on a simpler roof lands lower.
Every metal roofing job we do is covered by our 730-Day Done Right Promise, on top of the panel manufacturer’s finish and material warranty. If the workmanship isn’t right, we come back and fix it.
Get Your Free Metal Roofing Estimate in North Tustin
Ready to price a metal roof? Call (833) 749-3967 to schedule a free on-site estimate in North Tustin. We’ll inspect the roof, measure the job, and put a written line-item quote in your hands, with no surprises and no pressure. Upfront pricing, quality panels, and work backed in writing. That’s how we build a roof that lasts.
Written by the team at Groundwork Construction Co.












