







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Wood Fence in Santa Ana, CA: What It Costs and What You Get
A wood fence in Santa Ana typically runs $3,500 to $9,000 for a standard residential run, and most jobs are built over two to three days once materials are on site. You’re choosing between cedar, pressure-treated pine and redwood, and the biggest cost swings come from footage, height, gate count and how much old fencing has to come out first. Call (833) 749-3967 to set up a free on-site estimate.
How we build a wood fence here, start to finish

Wood fencing is simple work done carefully. The details are where fences fail five years in, so we don’t rush them.
Stage 1: The on-site measure and layout (about 60 to 90 minutes)
We walk the property line with you, confirm where the fence actually belongs, and check for sprinkler lines, gas stub-outs, and the shared boundary with neighbors. You decide the height (6-foot is standard; 4-foot and 5-foot are common on front yards), the gate locations, and which side gets the finished face. On tight Santa Ana lots, that last decision often matters more than people expect.
Stage 2: Demo and haul-off (half a day to a full day)
Old fencing comes down, posts get pulled, and concrete footings get broken out and hauled to the dump. If there’s a shared fence with a neighbor, this is the point where we photograph both sides before anything moves. On Santa Ana properties where the rear fence sits on a block wall or property line shared with an alley or another parcel, we confirm the setback before cutting.
Stage 3: Posts and concrete (day one)
We dig footings to depth, set pressure-treated posts in concrete, and brace them plumb. Post spacing runs 6 to 8 feet depending on panel design and wind exposure. Posts cure overnight before any pickets go on, which is why a two-day build is genuinely two days and not one long day pretending to be two.
Stage 4: Rails, pickets and gates (day two)
Rails go on, pickets get set with consistent spacing and a finished top line, and gates get hung with proper hardware, diagonal bracing and a self-latching mechanism if you want one. You walk the fence with us before we close out, and we flag anything that needs adjusting on the spot rather than after we’ve packed up.
Stage 5: Stain, seal and final walk (same day or a scheduled return)
Bare wood needs a sealer or stain, and we schedule that separately because freshly built fences need to dry before coating. On the final walk, we show you the gate operation, the post line and the finished faces, and you get everything in writing under our 730-Day Done Right Promise. If a gate sags or a picket splits in that window, we come back and make it right.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The options you’ll choose between
Most of the decision comes down to four things. Here’s what each one actually means in practice.
- Western red cedar: the best-looking choice and naturally rot-resistant. It weathers to a silver-gray without stain, holds a finish beautifully, and costs the most of the three wood options. Good fit for a front-yard fence or a visible side yard.
- Pressure-treated pine: the workhorse. Treated for ground contact, holds up well, and costs noticeably less than cedar. It can check and warp a bit more over time, so we brace and space it properly and recommend a sealer within the first few months.
- Redwood: strong against moisture and insects, dimensionally stable, and it stains well. The price sits between pine and cedar depending on grade. A solid pick where you want long service life without the cedar premium.
- Board style: dog-ear, flat-top, shadowbox or board-on-board. Shadowbox and board-on-board give privacy with a finished look on both sides, which matters on shared lines. Standard dog-ear is the most economical.
- Height and gates: 6-foot is the standard privacy height. Adding a walk gate runs more than a plain run per linear foot because of hardware and framing; a double drive gate is its own line item.
- Post type: pressure-treated posts set in concrete are the default. Steel posts are an option on long runs where you want to skip the rot risk entirely, and they add cost.
What a wood fence costs in Santa Ana, CA

Expect $3,500 to $9,000 for a typical residential wood fence in Santa Ana. Here’s how the number moves:
- Linear footage: the single biggest factor. A 60-foot side yard and a 200-foot perimeter are different jobs.
- Material grade: pressure-treated pine sits at the low end, redwood in the middle, cedar at the top.
- Height and style: 6-foot board-on-board costs more per foot than a 4-foot dog-ear run.
- Demo and haul-off: pulling an old fence, breaking out footings and disposing of it all adds cost.
- Gates and site access: a walk gate or drive gate adds hardware and framing. Tight side-yard access where we can’t back up to the fence adds labor time.
A written estimate from us itemizes footage, material, gates, demo and disposal line by line. Upfront pricing, no surprises: the number you see is the number you pay, and a change only happens if you ask for one in writing. What’s usually not included: stain or sealer if you want it done later, and any repair to a neighboring structure the fence ties into.
See the difference
Before
After
Before
After
Before
AfterWhat Santa Ana homes specifically do to this job
Santa Ana’s building stock is a big part of why this job looks different here. Much of the city is 1920s to 1950s California bungalows, Spanish Colonial Revival and Craftsman homes, plus postwar stucco tract housing, and the lot lines on those properties are often tight. Rear yards back up to alleys, garages sit at the property line, and there’s frequently a shared fence with a neighbor on at least two sides. That means we measure twice on shared lines and photograph everything before demo, because getting a boundary wrong on a Santa Ana lot is a headache nobody wants.
Older properties also mean we find things under the ground. Original clay sewer laterals, old irrigation runs and stub-outs we didn’t expect are common when we’re digging post holes on pre-1950s lots. We probe for utilities before we dig, and if we hit something, we stop and talk to you about it rather than guessing.
On the approval side, fence height and placement in Santa Ana follow city zoning limits, and most residential fences under 6 feet don’t need a building permit. Anything taller, or a fence on a corner lot with sight-line restrictions, needs checking before we build. If your property is in the historic district or near the downtown and Lacy-area bungalows, and the fence ties into a structure that might involve preservation review, we flag that early rather than mid-build. Homeowners who want a paved approach to the new gate often pair this with Paver Driveways in Santa Ana so the front elevation reads as one finished job, and a hard, clean apron can also come from Concrete Driveways & Concrete Work in Santa Ana.
The dry Santa Ana winds also matter to fence design. Wind load on a 6-foot solid fence is real, so we set posts deeper and space them tighter on exposed runs. That’s a detail you don’t notice on a calm day and absolutely notice after a wind event.
Serving Santa Ana, CA – Our Local Coverage Area
We serve Santa Ana and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked: Wood Fence in Santa Ana

Most wood fences take two to three days once materials are on site, with demo and haul-off sometimes adding a day on older properties. Post concrete needs to cure overnight before pickets go on, which sets the floor. Call (833) 749-3967 for a realistic schedule on your run.
Most residential wood fences at 6 feet or under don’t require a building permit in Santa Ana, but height limits, corner-lot sight lines and historic-district rules can change that. We check the requirements for your address before we build and tell you upfront whether a permit applies. Call (833) 749-3967 with your address to confirm.
Yes, in most cases we lay out the fence line around established plantings and mark irrigation before digging. Where a post lands directly on a sprinkler zone or main line, we relocate the head or flag it so you can decide. Call (833) 749-3967 to walk the line with us.
Plan on $3,500 to $9,000 for a standard residential wood fence in Santa Ana, with footage, material grade and gates driving the difference. We give you a line-item written estimate so you can see exactly where the money goes. Call (833) 749-3967 for a free estimate.
Every fence we build is covered by our 730-Day Done Right Promise, one of the longest workmanship guarantees in residential construction. If a gate sags, a post shifts or a picket fails within that window, we come back and make it right. Call (833) 749-3967 to schedule your free estimate.
Get a free estimate on your wood fence in Santa Ana
We’ll come out, measure the run, confirm the property line, and hand you a written line-item estimate for your wood fence in Santa Ana with no pressure and no vague lump sums. Call (833) 749-3967 and a live person answers, day or night. You’ll know exactly what the job costs and what’s covered before you commit. If your project is part of a full Fence Installation in Santa Ana plan, we’ll scope that too. Our Fence Installation service covers the wider range, and you can see everything we handle across Santa Ana on our service-area page.
Written by the team at Groundwork Construction Co.












