







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Aluminum Fence in Tustin: What It Costs and What a Real Install Looks Like
An aluminum fence in Tustin typically runs $4,000 – $10,000 installed, with most standard residential runs landing around $3,500 – $9,000. The work itself moves fast once the layout is set: a straight run of 100 to 150 feet is usually two to four working days from dig to final gate swing. What stretches the schedule is permitting and HOA review, not labor. Call (833) 749-3967 and we’ll give you a written, line-item number for your specific yard.
How the Job Actually Runs, Stage by Stage

Here’s the sequence we follow on every aluminum fence install in Tustin. The residential work scope is part of a full Fence Installation in Tustin project, so the early stages overlap with everything else we do on-site.
- Day 1 morning – site walk and utility locate. We mark the property line from your plat, call for utility locates (811 takes 2 – 3 business days to clear), and flag any irrigation, gas, or low-voltage lines we’ll need to work around. You confirm the exact line and gate positions before anyone lifts a shovel. This decision locks in cost; a relocated gate is a change order, not an afternoon tweak.
- Day 1 – 2 – layout and demo. We snap the fence line, dig and set footings to the right depth for Tustin’s soil, and pull old fencing if any is coming out. Footings cure 24 – 48 hours before posts go in – you can’t rush concrete in this climate.
- Day 2 – 3 – posts, panels, gates. Aluminum panels drop into the cured posts, rails and pickets set, and gates hang on their hardware. We check every gate for plumb and swing before we call it done.
- Day 3 – 4 – cleanup and walkthrough. We rake out trenches, haul off debris, and walk the run with you. You sign off on the 730-Day Done Right Promise, and we document the install for your records.
You’ll make three real decisions during those days: the line and gate placement, the style and finish, and whether to add a matching walk gate or drive gate. Everything else is us.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Aluminum Fence Choices That Actually Move the Number
Aluminum isn’t a single product. The spec you pick shapes both the price and how the fence looks in ten years.
- Picket grade (residential vs. heavy). Standard .050-inch wall pickets are fine for a side-yard run; heavier .065-inch or thicker rails take more abuse and cost more. Trade-off: heavier is harder to dent, but you’ll pay for the upgrade.
- Rail spacing and height. 4-foot and 5-foot runs are common; 6-foot privacy panels push the price up because you’re buying more material per linear foot. Think about sightlines and any pool code before you commit.
- Finish. Powder-coat black is the default and holds up in UV-heavy Tustin sun. Colors add a touch of cost and a week to delivery if they’re not in stock.
- Gate hardware. Builder-grade latches and hinges wear out first. Self-closing hinges and a keyed latch are worth the small upcharge on any gate a kid or a dog uses daily.
- Ornamental accents. Spear tops, rings, and matching post caps raise the price but turn a plain run into something that reads like wrought iron. Honest trade-off: more decorative points, more places to collect spiderwebs and dust.
We stock a curated set of top-tier material brands, and where a job calls for a composite or accent panel to tie into an existing Fence Installation layout, we can match it. James Hardie products come up most often when a fence abuts a hardie-sided wall that needs a clean transition.
What Aluminum Fence Costs in Tustin, CA

Plan on $4,000 – $10,000 for a full aluminum fence install in Tustin, with most homes landing in the $3,500 – $9,000 range once the run is sized. The five variables that push you toward the low or high end:
- Linear feet. The single biggest driver. A short 60-foot side-yard run lands near the low end; a perimeter job over 200 feet heads toward $10,000.
- Height and picket grade. Going from 4-foot to 6-foot and stepping up to heavy-gauge pickets can add 20 – 30%.
- Gates. A walk gate adds several hundred; a double drive gate with keyed hardware adds more. Each gate is its own hardware set.
- Terrain and footing count. Sloped lots and rocky soil mean more footings and more concrete, which adds cost. Flat, well-drained ground is the cheap version.
- Permit and HOA scope. A simple fence permit is one line item; an overlay district or historic review adds plan-review fees and time.
A written estimate from us lists linear feet, gauge, finish, gate count, footing depth, permit fees, and demo/disposal as separate lines. What it does not include: landscaping repair beyond raking, utility relocation charges (rare, but possible), or HOA architectural-review fees you pay directly.
See the difference
Before
After
Before
After
Before
AfterWhat Tustin Homes Do to This Job
Tustin splits into two very different fence problems. In the 92780 ZIP, the 1950s – 1970s single-story ranches mean fence lines often sit over old irrigation, shallow-slab additions, and stucco walls with thin paint that need careful footing placement. In 92782 – Tustin Ranch and Columbus Square, built out through the 1980s – 2000s – the tract homes sit inside HOAs with strict architectural-review rules, and any project near the former MCAS Tustin blimp hangars can trigger extra environmental and historical review. That means two timelines for two zips: the 92780 job moves on a routine fence permit, while the 92782 job can stall for weeks in design review. We plan for that up front. The dry Santa Ana winds and seasonal winter rain also punish poorly set footings, so we set them deeper and check drainage before the dig. Call (833) 749-3967 for a Tustin-specific quote on Tustin aluminum fence.
Serving Tustin, CA – Our Local Coverage Area
We serve Tustin and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Aluminum Fence in Tustin

Most aluminum fence installs in Tustin take two to four working days once the permit is in hand and the layout is confirmed. Permitting and HOA review add the real wait – plan one to two weeks for a routine job, longer in an HOA. Call (833) 749-3967 to get the timeline for your specific yard.
Most residential aluminum fence installs in Tustin do require a permit, and HOA architectural approval in 92782 is often required on top of it. We pull the permit and manage the inspection as part of the job. Call us and we’ll confirm what your specific address needs before you commit.
Yes, in most cases. We set footings around existing irrigation and utilities and plan the layout to avoid pipes and low-voltage runs wherever possible. If a line has to move, we flag it before the dig, not after. Estimates are free, so call (833) 749-3967 and we’ll walk the yard.
Aluminum in Tustin typically lands between $4,000 and $10,000, close to vinyl in the same run but with a longer lifespan and less maintenance than wood. It’s a premium over basic wood, and the trade-off is durability in the sun. Call (833) 749-3967 for an exact line-item quote on your yard.
Every aluminum fence we install is covered by the 730-Day Done Right Promise – if it’s not done right, we make it right. That’s on workmanship, in writing, for two full years. Call (833) 749-3967 and we’ll explain exactly what the promise covers on your install.
Get a Free Aluminum Fence Estimate in Tustin
We’ll walk the property line, confirm gate placement, and hand you a written estimate with the linear feet, gauge, finish, gate count, and permit broken out line by line. No surprises, no vague “starting at” numbers. Many homeowners pair this with Driveway Repair & Replacement in Tustin or Patios, Walkways & Pool Decks in Tustin to tie the whole exterior together. Call (833) 749-3967 for a free estimate – a live person answers, 24/7.
Written by the team at Groundwork Construction Co..












