







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Tub-to-Shower Conversion in Orange, CA: What It Involves and What It Costs
A tub-to-shower conversion in Orange typically runs $3,500 to $10,000 and takes about 5 to 10 working days from demo to final inspection. The job means removing the tub, reworking the drain and waterproofing, setting a new shower pan and walls, and tying the finished assembly back into your existing bathroom. Call (833) 749-3967 and we’ll walk your specific bathroom and give you a written number before anyone swings a hammer.
How a Tub-to-Shower Conversion Actually Unfolds, Stage by Stage

Most homeowners picture a quick swap. In practice a tub-to-shower conversion is a small, sequenced construction project, and the order matters more than the speed. Here’s the real arc of the job.
Stage 1: Measure and layout (day 1, half a day). We confirm the tub alcove dimensions, check where the drain sits relative to the existing rough-in, and verify the wall framing is sound. This is where you decide the shower footprint: a standard 30×60 replacement, a wider curbless entry, or a corner layout. Any change to the drain location gets flagged here, because moving it is the single biggest cost lever.
Stage 2: Demo and rough-in inspection (days 1-2). The old tub, surround, and any failing backer come out. We inspect the framing and subfloor for rot, which is common behind older tubs where caulk has failed for years. If plumbing or electrical needs to move, this is when it happens. A rough-in inspection usually lands on day 2 or 3 depending on the city’s schedule. You don’t have to be home for it, but you do need to have signed off on the valve and drain position by then.
Stage 3: Waterproofing and pan (days 3-4). This is the stage that decides whether the shower lasts. We build a sloped mortar pan or set a manufactured pan, then apply a bonded waterproofing membrane up the walls to the height you’ve chosen. A pre-slope done wrong is why so many showers leak at year seven, so we don’t rush it. You’ll choose tile and grout at your estimate, not here, so the material is on site.
Stage 4: Tile and fixtures (days 4-8). Wall tile, floor tile, niche, and trim go in, then the valve trim, showerhead, and any glass get set. Glass templating for a framed or semi-frameless door can add a few days of lead time, so it’s ordered early. Expect the bathroom to be unusable through this stretch.
Stage 5: Final inspection and walkthrough (days 8-10). The city signs off, we seal and clean, and you walk the job with us. Anything on your punch list gets addressed before we call it done, and the finished work sits under our 730-Day Done Right Promise.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between for Your Conversion
Almost every decision on this job comes down to how the shower is built and what it’s clad in. Here’s the honest trade-off on each.
- Acrylic or fiberglass surround: the fastest and least expensive route, usually at the bottom of the $3,500-$10,000 range. It’s one molded piece, easy to clean, and holds up fine in a hall bath. The trade-off is looks and lifespan; it can chalk and scratch over 15-20 years.
- Tile over a waterproofed pan: the most common choice in Orange homes and the one that lets you match an older bathroom. Porcelain runs $8-$20 per square foot installed; natural stone costs more and needs sealing. It lasts decades if the waterproofing is done right, which is why the pan matters more than the tile.
- Prefab shower pan vs. custom mortar pan: a manufactured pan is cheaper and faster; a custom pan lets you control the slope and fit an odd alcove. Curbless entry is a custom-pan job and adds cost, but it’s the right call if anyone in the house has mobility concerns.
- Glass: a framed door is the budget option, semi-frameless is the sweet spot, and fully frameless glass is the premium pick. Glass is templated after tile, so it adds a few days of lead time.
- Fixtures: Kohler and similar mid-tier valves and trim hold up well and are widely serviceable; builder-grade fixtures save money now and tend to get replaced first. We keep a curated set of brand partners so you’re choosing quality, not just what’s on the shelf.
What Tub-to-Shower Conversion Costs in Orange, CA

For a straightforward alcove conversion in Orange, expect $3,500 to $10,000. A basic acrylic swap sits near the low end; tile, a custom pan, and glass push toward the top. Here’s how the line items break out.
| Line item | Typical range |
|---|---|
| Demo, haul-away, and rough-in prep | $600-$1,200 |
| Shower pan and waterproofing | $700-$1,800 |
| Wall and floor tile (material and labor) | $900-$2,500 |
| Valve, trim, showerhead, drain | $400-$1,000 |
| Glass door and enclosure | $500-$1,800 |
| Permit and inspection | $200-$700 |
Four things move the number. Size: a 30×60 alcove is the baseline; a larger footprint means more tile and often a custom pan. Existing condition: hidden rot or a failed subfloor adds framing and repair work. Moving the drain or valve: relocating plumbing adds real cost. Material grade: acrylic vs. porcelain vs. stone is the widest swing. Your written estimate from us lists each of these as a fixed line, so the number you see is the number you pay, with no change-order surprises once demo starts.
See the difference
Before
After
Before
After
Before
AfterWhat Orange Homes Specifically Do to This Job
Orange has one of Southern California’s largest historic cores, and that shapes conversions in ways it doesn’t in a newer suburb. In the Old Towne bungalows and Victorians around the Plaza District, many bathrooms predate modern plumbing standards, so opening a wall often reveals galvanized supply lines or a pan set directly on the subfloor with no waterproofing at all. We plan for that contingency up front rather than discovering it mid-demo. In the 1970s-90s tract homes out toward ZIP 92869, the tubs and surrounds are usually original, and the framing is predictable, which keeps the job closer to the low end of the range.
Permitting runs through the city and includes a plumbing rough-in inspection and a final, typically adding three to five days to the schedule. Historic-district properties in Old Towne can trigger design review when the change is visible from the street or alters exterior character, so we build the approval cycle into the schedule rather than around it. We cover all of Orange, from 92866 through 92867, 92863 and 92864. If the conversion is part of a larger scope, it often makes sense to fold it into our bathroom remodeling service so permits and inspections run once, and homeowners planning exterior work alongside often pair this with Tile Roofing in Orange to keep one crew on site.
Serving Orange, CA – Our Local Coverage Area
We serve Orange and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Tub-to-Shower Conversion in Orange

Most conversions take 5 to 10 working days from demo to final inspection, though glass templating and city scheduling can stretch that. Call (833) 749-3967 and we’ll give you a realistic date range based on your bathroom, not a guess.
Yes, most conversions require a plumbing permit and inspections in Orange, since the drain and valve are part of the work. We pull the permit and manage the inspections so you’re not chasing the city yourself.
Often, yes. If the drain and valve stay in roughly the same footprint, the job is far simpler and stays near the low end of the range. Moving the drain to fit a larger or curbless layout is what drives the cost up.
Plan on $3,500 to $10,000, with a basic acrylic swap near the bottom and tile with a custom pan and glass near the top. Call (833) 749-3967 for a written line-item estimate; it’s free.
Every conversion is covered by our 730-Day Done Right Promise: if it’s not done right, we make it right. We also back the material brands we specify, so the tile, valve, and glass carry their own coverage on top of ours.
Get a Free Estimate for Your Orange Conversion
If you’re ready to see what your bathroom would take, call (833) 749-3967 to schedule a free on-site estimate. We’ll measure the alcove, check the drain and framing, talk through acrylic vs. tile, and hand you a written line-item number with the permit and glass included. If it’s part of a bigger Bathroom Remodeling in Orange, we scope it together so there are no surprises. A live person answers, 24/7.
Written by the team at Groundwork Construction Co.












