







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Custom & Geometric Windows in Orange, CA: What the Job Actually Involves
Custom and geometric windows in Orange typically run $8,000 to $25,000 for a whole-house package or $1,200 to $3,500 per individual shaped unit, and most jobs take two to four weeks from template to final trim. The work covers arched, round, trapezoid, triangular and eyebrow windows, plus any stock opening that has to be rebuilt because the shape doesn’t exist in a catalog. Call (833) 749-3967 and we’ll walk your openings and give you a written number before anyone touches a frame.
How We Build and Install a Shaped Window, Stage by Stage

Geometric windows are made to order, so the sequence matters more than the labor. Here’s the real order of events.
Stage 1: Template and field measure (day 1, about 2 hours). We measure every opening and, for arches and trapezoids, build a physical template of the rough opening. You decide here whether we’re matching the existing style exactly or changing it. On an Old Towne bungalow, that’s often the difference between a simple eyebrow arch and a full half-round.
Stage 2: Product selection and order (day 1 to day 3). We sit down with frame material, glass package and grille pattern. This is your biggest decision point, because it locks the lead time. Standard shapes in a stock brand run two to four weeks. True custom curves and radius work run five to eight weeks. You sign off on the spec sheet before the order goes in, no exceptions.
Stage 3: Fabrication and permit (weeks 1 through 6, in parallel). While the units are being built, we pull the permit and, where the shape changes the exterior wall, submit to the city. You’re not waiting on us to start that clock.
Stage 4: Demo and rough framing (days 1 and 2 of install). The old unit comes out, the opening gets squared and shimmed, and any new header or framing for a changed shape goes in. On a shape change, expect framing on day one and sheathing and flashing on day two. You’ll see the opening exposed overnight, so we tarp it.
Stage 5: Set, flash, trim and finish (days 2 through 4). We set the unit, flash the sill and head, insulate the gap, then trim to match your existing casing. Final walkthrough the same week. Most single-window and small cluster jobs are done in a few days once the unit lands; the wait is the factory, not the crew.
If the shaped window is part of a larger exterior project, it usually sits inside a full Windows & Doors in Orange scope, and we’d rather plan it that way than piece it out.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Actually Choose Between
Three decisions drive almost everything on a geometric window: what the frame is made of, what the glass does, and how the shape gets built. Here’s the honest trade-off on each.
- Vinyl frames: The lowest up-front cost per opening. Good for simple arches and standard radii. Vinyl handles Orange’s inland heat fine, but it can’t be welded into tight custom curves as cleanly as wood or aluminum, and it limits you on color.
- Wood-clad and aluminum-clad frames: The middle path and the one we suggest most often for historic character. A wood interior takes paint and stain like the original trim, and the aluminum exterior holds up to sun and wind without annual upkeep. Expect to pay more than vinyl and to get a cleaner radius.
- Fiberglass and aluminum on exposed walls: Strong and stable. A good fit where a shaped window faces the afternoon sun or a windy canyon edge.
- Glass package: Dual-pane low-E is the baseline for anything facing west or south. Tempered glass is code-required in any unit low enough to be a hazard or where the shape puts glass near a door. Laminated glass adds a wind and impact margin at roughly 15 to 25 percent more than standard.
- True radius vs. simulated shape: A true curved sash is fabricated, so it costs more and takes longer. A simulated geometric shape (a rectangular frame with shaped muntins and a shaped interior casing) can hit the same look against a wall for noticeably less. For a lot of Orange arches, this is the smart money.
We work with established window manufacturers on these orders so the shapes and the warranty both hold up in writing. Our broader Windows & Doors service handles the full range if you’re replacing more than the shaped units.
What Custom & Geometric Windows Costs in Orange, CA

Plan on $8,000 to $25,000 for a custom and geometric window package in Orange, depending on how many openings and how hard the shapes are. A single custom-shaped unit installed runs roughly $1,200 to $3,500. The variables that push a job toward one end of that range are predictable.
- Number and complexity of shapes: A simple eyebrow arch is a modest premium. A true multi-pane half-round or a trapezoid cluster is where the cost climbs.
- Frame material: Vinyl at the low end, wood-clad and aluminum-clad in the middle, true custom fabrication at the top.
- Existing condition: Rot behind the trim, out-of-square framing or a missing header turns a swap into a repair. That work gets quoted as a line item, never as a surprise.
- Changing the opening: Adding or enlarging an opening means framing, sheathing, flashing and a permit, which is where a job jumps most in cost.
- Permit and design-review scope: An exterior change in a historic district can add city review time and conditions.
Your written estimate breaks out units, materials, labor, permit and disposal line by line, so the number you see is the number you pay. Framing repairs found behind the wall are the one thing we can only price once we’re in, and we show you before we proceed. Projects over $10,000 qualify for $1,000 off, and 0% financing for 18 months is available if you want to spread it out.
See the difference
Before
After
Before
After
Before
AfterWhat Orange Homes Specifically Do to This Job
Orange is not a city where one window approach covers everything. In Old Towne and the Plaza District, we’re regularly working on 1870s-to-1920s bungalows and Victorian commercial buildings, and exterior window changes there can require preservation review, not just a building permit. We build the schedule around those approval cycles so the units aren’t sitting in a warehouse while the city reviews. Out toward the east side and the 92869 ZIPs, we’re in 1970s-to-90s tract and custom homes where a geometric window is usually a modern design choice and the permit is a straightforward process.
Then there’s the weather. Orange’s dry inland summers and Santa Ana winds put real wind load on west and canyon-facing openings, and the hillside lots near the Santiago Hills edges see it worst. A shaped window with a thin frame and a weak seal is the first thing to rattle, whistle or leak in a wind event. That’s why we quote flashing and wind-rated installation on exposed walls, not leave it to chance.
We cover the whole city, including the 92864, 92863, 92865 and 92857 ZIP codes, so you can see our full Orange service area if you’d like to confirm your street is in it.
Serving Orange, CA – Our Local Coverage Area
We serve Orange and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions About Custom & Geometric Windows in Orange

Allow two to eight weeks, with most of that being factory lead time rather than installation. Installation itself is typically two to four days for a small set of openings. Call (833) 749-3967 for a schedule based on the exact shapes you want.
Yes, in most cases, especially when the shape changes the opening or sits in a historic-district exterior. We pull the permit and handle inspections as part of the job. Call (833) 749-3967 and we’ll tell you what your specific opening requires.
Often, yes. If the new unit fits the existing rough opening, it’s a clean swap with no framing changes. Matching an odd existing shape is the catch, which is why we template first. Call (833) 749-3967 to have us measure and confirm.
Most packages land between $8,000 and $25,000, and a single shaped unit installed runs about $1,200 to $3,500. Material, shape complexity and any framing repair move that number. Call (833) 749-3967 for an exact written quote, free of charge.
Every install is covered by the 730-Day Done Right Promise: if it isn’t done right, we make it right. That sits alongside the manufacturer’s product warranty on the units themselves. Call (833) 749-3967 with any warranty question before you sign anything.
Get a Free Estimate for Custom & Geometric Windows in Orange
Tell us the openings and the shape you have in mind, and we’ll come out, measure them and give you a line-item written estimate with no pressure and no charge. Homeowners often pair this with Concrete Driveways & Concrete Work in Orange or Asphalt Driveways & Resurfacing in Orange while the exterior is torn up anyway. Call (833) 749-3967, choose from upfront pricing, $1,000 off projects over $10,000, or 0% financing for 18 months. From foundation to finish line, backed in writing.
Written by the team at Groundwork Construction Co.












