







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Cabinets & Countertops in Dana Point, CA: What the Job Actually Involves
Cabinets & countertops in Dana Point runs $14,000 – $45,000 as a combined project, and most of that money goes to the boxes and the stone, not the labor. The job means tearing out the old casework, setting new cabinet boxes level and plumb against walls that are rarely square, templating the countertop after the cabinets are in, then cutting and setting the stone or quartz so the seams land where you want them. Plan on two to three weeks from demo to final caulk, and call us at (833) 749-3967 to start with a free on-site estimate.
Kitchen Cabinet Installation in Dana Point alone runs $4,000 – $13,000. Countertop Installation in Dana Point runs $2,000 – $6,500. Those two line items are the spine of this page, and everything below explains what pushes a job toward the low number or the high one.
How the Cabinets & Countertops Process Runs, Stage by Stage

Here’s the honest sequence, with the decisions you’ll make and when you’ll make them. Nothing here is hidden behind “we handle everything.”
- 1
Day 1 – Site measure and layout confirmation. We measure every wall, check for out-of-square corners and floor dips, and photograph the existing plumbing and electrical locations. You confirm the final cabinet layout and door style on this visit. Skipping this step is why so many cabinet orders come back wrong.
- 2
Day 2 – Demo and disconnect. Old cabinets come out, the sink and dishwasher get disconnected, and the walls come down to the studs where needed. We label and protect anything staying. This is a single day for most Dana Point kitchens.
- 3
Days 3 – 4 – Rough-in and wall prep. If you’re relocating the sink or adding an outlet for a built-in appliance, the plumber and electrician work here, before cabinets go in. Drywall repair, patching, and paint prep follow. This is the stage that’s invisible in the finished product and the one that most affects how square the cabinets sit.
- 4
Days 5 – 7 – Cabinet installation. Base cabinets first, leveled and shimmed on the floor, screwed to studs, then uppers hung to the layout line. Crown, light rail, filler panels, and toe kick get fitted. You’ll want to be on hand for the drawer and door hardware decisions around this point.
- 5
Days 8 – 14 – Template, fabricate, install countertops. The fabricator templates the installed cabinets, cuts the stone or quartz in the shop, and returns to set it. Sink cutout, faucet holes, and seam placement are decided before the slab is cut, not after.
If this work is part of a full Kitchen Remodeling in Dana Point project, the cabinet and countertop stages fold into the larger schedule and the demo day shifts accordingly. Standalone, the sequence above holds.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between for Cabinets & Countertops
The real decision set is smaller than the showroom suggests. Four choices drive most of the cost and all of the long-term satisfaction.
- Stock, semi-custom, or full custom cabinets. Stock boxes come in fixed sizes and cost the least, but they force filler strips where walls aren’t true. Semi-custom adjusts in 3-inch increments and fits most Dana Point kitchens. Full custom is built to the inch and the price reflects it. In a 1970s Capistrano Beach ranch with out-of-square walls, semi-custom almost always beats stock on final fit.
- Door material and finish. Painted MDF doors look crisp and cost less; solid wood and plywood doors hold up better to moisture and take a refinish later. Thermofoil is the budget choice and can peel near a dishwasher that vents steam. In a marine-layer climate, we steer toward painted or wood doors over thermofoil.
- Quartz versus granite versus a solid surface. Quartz is engineered, non-porous, and doesn’t need sealing; it’s the default for most of the kitchens we install in Dana Point. Granite is natural stone, unique per slab, and needs resealing roughly once a year. Solid surface is the least expensive and can be sanded to remove a scratch, but it scorches under a hot pan.
- Edge profile, thickness, and sink style. A standard eased edge in 2cm or 3cm quartz is the value play. A thicker mitered edge adds a premium look and cost. An undermount sink pairs cleanly with stone; a farmhouse apron sink changes the cabinet run and needs to be planned before the order, not after.
KraftMaid and Cambria are two of the brand partners we source from most often, and both are worth asking about during the estimate.
What Cabinets & Countertops Costs in Dana Point, CA

The combined project lands between $14,000 and $45,000 in Dana Point. Here’s how each line item breaks out and what moves the total.
| Line Item | Typical Range |
|---|---|
| Cabinet installation | $4,000 – $13,000 |
| Countertop installation | $2,000 – $6,500 |
| Backsplash (if added) | $800 – $2,500 |
| Kitchen island installation | $3,000 – $10,000 |
Five variables push a job toward the high end:
- Linear feet and cabinet count. A 10-foot galley and a 25-foot galley with an island are different projects entirely. Cabinet count, not room size, is the main driver.
- Layout changes. Moving the sink, range, or refrigerator means plumbing and electrical work. That’s real money and adds days to the schedule.
- Material grade. Stock thermofoil cabinets with a solid-surface top anchor the low end. Semi-custom painted cabinets with quartz and a mitered edge sit at the top.
- Existing condition. Water damage behind the sink, a floor that isn’t level, or a wall that needs reframing all add to the prep line.
- Permit scope. A straight cabinet-and-counter swap typically doesn’t require a permit. Relocating plumbing, moving a gas line, or adding a circuit does, and that adds inspection time and cost.
A written, line-item estimate from us spells out cabinet brand and model, countertop material and thickness, demo, disposal, and any rough-in work. It won’t include appliances, a new sink and faucet unless you’ve asked for them, or the cost of a permit if one is required.
See the difference
Before
After
Before
After
Before
AfterWhat Dana Point Homes Specifically Do to This Job
Dana Point’s housing stock splits into two eras, and each one changes how a cabinet and countertop job runs. In the older beach cottages and 1960s – 70s single-story ranch homes around Capistrano Beach and the Lantern District, the walls are rarely plumb and the floors have settled. Cabinets have to be shimmed and scribed, and we plan on it. The countertop template is cut after the boxes are set so the stone follows the room, not the other way around.
On bluff and canyon lots off Del Obispo and Selva, the newer custom homes often have larger kitchens with islands and built-in appliance runs. That’s where an island install and a mitered quartz edge become part of the same conversation. The marine layer humidity and salt-laden air matter too: thermofoil doors peel faster here, and quartz beats natural stone if you don’t want to reseal granite every year. Any structural or plumbing change in these homes gets flagged for coastal review and grading rules before work starts. We cover the full Dana Point area and know the difference.
Serving Dana Point, CA – Our Local Coverage Area
We serve Dana Point and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Cabinets & Countertops in Dana Point

Two to three weeks from demo to final caulk for most kitchens. The cabinet stage runs about three days, and the template-to-install window on the countertops is usually seven to ten days. Call (833) 749-3967 for a schedule that fits your kitchen.
A straight swap of cabinets and countertops in the same footprint typically doesn’t require a permit. Moving plumbing, gas, or electrical does, and coastal-bluff lots may trigger coastal development review for structural work. We pull the permits when they’re needed and confirm scope in writing.
Yes, and most of the jobs we run in Dana Point stay in the existing footprint. Keeping the sink and range where they are is the single biggest lever on cost. If you’re weighing a layout change, bring it up at the free estimate and we’ll price both versions.
The combined range is $14,000 – $45,000, with cabinet installation at $4,000 – $13,000 and countertop installation at $2,000 – $6,500. Material grade and layout changes move the number. Call (833) 749-3967 for a line-item quote.
Our workmanship is covered by the 730-Day Done Right Promise: if it’s not done right, we make it right. Cabinet and countertop manufacturer warranties sit on top of that. And on the price side, the number you see on the estimate is the number you pay.
Homeowners often pair this work with a Walk-In Showers & Shower Remodeling in Dana Point project next door, or a Tub-to-Shower Conversion in Dana Point, so ask about pricing both at once. For the wider project, see our Kitchen Remodeling service.
Ready to Price Cabinets & Countertops in Dana Point?
Call (833) 749-3967 to schedule a free on-site estimate for cabinets & countertops in Dana Point. On the call we’ll ask about your layout, your cabinet and countertop preferences, and whether plumbing or electrical is moving. Then we’ll visit, measure, and hand you a written line-item quote with fixed pricing and no change orders. Calls are answered by a live person, 24/7.
Written by the team at Groundwork Construction Co.












