







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Tub-to-Shower Conversion in Dana Point, CA: What It Takes and What It Costs
A tub-to-shower conversion in Dana Point typically runs $3,500 to $10,000 and takes about 5 to 10 working days from demolition to final walkthrough. The job means removing the tub and its surrounding tile or surround, reworking the drain and waterproofing, and rebuilding the wet area as a walk-in shower sized to the alcove you already have. Most conversions keep the existing footprint. Call (833) 749-3967 for a free on-site estimate and a written line-item quote.
How we handle a tub-to-shower conversion, stage by stage

No two alcoves are the same, but the sequence is. Here’s what actually happens and where you make decisions.
Stage 1: Measure, inspect, and quote (one visit)
We pull the tub surround apart far enough to see what’s behind it: the drain line, the valve, the studs, and whether there’s water damage. You get a written line-item estimate with the number you see being the number you pay. This is also when you decide shower size (typically a 60-inch alcove, though a 48-inch option exists for tighter baths), pan material, wall finish, and whether a bench or niche is going in.
Stage 2: Demo and rough-in (days 1 – 2)
Out comes the tub, the surround, and any rotten drywall or subfloor. If the drain needs to move off-center to a new pan location, the plumber resets it now. The valve gets replaced to current standards, which is nearly always worth doing while the wall is open. A permit inspection often happens at this rough-in stage. This is the day you want to have tile already selected and on site – waiting on a special-order finish is the single most common reason a conversion stretches past two weeks.
Stage 3: Waterproofing (day 3)
This is the stage that separates a shower that lasts from one that leaks into your subfloor in year four. We install a bonded waterproofing membrane system – Schluter’s Kerdi is the standard we build to – over a sloped mortar pan, with seams banded and corners sealed. Curb, niche, and valve penetrations all get membrane. It looks unglamorous. It’s also the part you never see again once tile goes on.
Stage 4: Tile and setting (days 4 – 8)
Wall tile, pan tile, grout, and a cure window before any water touches it. Tile-setting on a full alcove usually takes three to four days depending on whether you chose large-format porcelain or a mosaic with a lot of cuts. Glass gets templated here and typically installs a few days after grout.
Stage 5: Fixtures, glass, and final inspection (days 9 – 10)
Showerhead, valve trim, grab bars if you want them, and the glass panel or door. Then the final inspection and a walkthrough with you. On the walkthrough we run the shower, check the pan slope drains fully, and hand over a written workmanship guarantee backed by our 730-Day Done Right Promise.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The options you’ll choose between
Most of the price swing on a Dana Point tub-to-shower conversion comes from four decisions, not from the labor itself.
- Pan type: acrylic vs. tile. An acrylic pan (Sterling makes solid options) costs less, installs in a day, and cleans easily. A tiled mortar pan with a Schluter membrane costs more and takes longer, but it matches the walls and lasts decades. In a beach-adjacent home, acrylic is the practical call; in a custom bath, tile wins on looks.
- Wall finish: porcelain vs. natural stone. Large-format porcelain is the workhorse and holds up to marine-layer humidity without sealing. Marble or travertine look richer but need regular sealing and stain more easily near salt air.
- Glass: framed vs. frameless. Frameless glass opens up a small bath visually and is the standard for a clean look. Framed is more forgiving on an out-of-square alcove wall.
- Fixtures. Grohe and similar brands are worth the upcharge on the valve and showerhead – the parts buried in the wall are the ones you can’t replace cheaply later. Surface trim is where you can save.
What Tub-to-Shower Conversion costs in Dana Point, CA

Expect $3,500 to $10,000 for a conversion in Dana Point. A straightforward acrylic-pan conversion in a Capistrano Beach cottage often lands near $4,000 – $5,500; a tiled walk-in with frameless glass and premium fixtures in a bluff-top custom home typically runs $7,500 – $10,000.
Four variables push the number up or down:
- Existing condition. Hidden water damage, rotten subfloor, or a drain that has to be relocated adds $600 – $2,000.
- Shower size and layout. A standard 60-inch alcove is the baseline. A wider opening or a bench adds cost.
- Material grade. Porcelain vs. natural stone, acrylic vs. tile pan, framed vs. frameless glass.
- Permit scope. Moving the drain or valve requires a plumbing permit and inspection, which adds time and a permit fee.
Our written estimates include demo, disposal, waterproofing, tile, setting materials, fixtures, glass, and cleanup. They don’t include major structural repair or plumbing reroutes discovered behind the wall – if we find that, we stop and quote it before touching it. Call (833) 749-3967 for a free estimate.
See the difference
Before
After
Before
After
Before
AfterWhat Dana Point homes specifically do to this job
Dana Point’s housing stock shapes conversions more than most people expect. The older beach cottages and 1960s – 70s ranches in Capistrano Beach and the Lantern District frequently carry original galvanized or early copper plumbing and single-pane coastal exposure, so opening a tub wall often surfaces a valve or drain that’s ready to be replaced – better to know that on day one than discover it later. Coastal bluffs and canyon lots off Del Obispo and Selva add another layer: marine-layer humidity and salt-laden onshore air are hard on metal trim and fasteners, so we spec corrosion-resistant hardware as standard. If your home is on a canyon or bluff lot, larger structural work often triggers California Coastal Commission review, though a like-for-like tub-to-shower conversion usually stays inside the existing footprint and avoids that. When the conversion is part of a full Bathroom Remodeling in Dana Point, we coordinate the whole scope through our Bathroom Remodeling service so the coastal review and permits are handled together. We cover all of Dana Point, 92629 included.
Serving Dana Point, CA – Our Local Coverage Area
We serve Dana Point and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked – Tub-to-Shower Conversion in Dana Point

A typical Dana Point tub-to-shower conversion takes 5 to 10 working days once materials are on site. The floor is your decision speed on tile – special-order finishes that haven’t arrived can add days. Call (833) 749-3967 to get a timeline for your specific bath.
Yes, in most cases. If the drain, valve, or plumbing changes at all, a plumbing permit and inspection is required, and we pull it and pass it. A pure like-for-like swap with no plumbing change sometimes doesn’t require one, which we confirm in writing before we start.
Usually yes. Most conversions keep the drain where it is and reshape the pan around it, which saves money and permits. If the alcove layout needs a centered drain for a walk-in, we relocate it and quote it as part of the estimate.
It runs $3,500 to $10,000, depending on pan type, tile grade, glass, and whether we find hidden water damage. Call (833) 749-3967 for an exact quote – estimates are free.
Every conversion we do is covered by our 730-Day Done Right Promise – if it’s not done right, we make it right. That covers our workmanship for two years, well beyond the industry norm. Products carry their own manufacturer warranties in addition to ours.
Get a free tub-to-shower conversion estimate in Dana Point
If you’re considering a tub-to-shower conversion in Dana Point, call (833) 749-3967 to schedule a free on-site estimate. We’ll inspect the alcove, walk you through the options, and leave you with a written line-item quote. No-hassle upfront pricing, 0% financing for 18 months available, and $1,000 off projects over $10,000. Homeowners often pair this with Metal Roofing in Dana Point or Tile Roofing in Dana Point when the whole home needs attention.
Written by the team at Groundwork Construction Co.












