







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Custom & Geometric Windows in Irvine, CA: What the Job Actually Involves
Custom & geometric windows in Irvine typically run $6,500 to $22,000 for a whole-house package, or $1,200 to $4,500 per opening for a one-off arch, round or trapezoid unit, and a typical job takes three to six weeks from template to final inspection. The short version: each window is measured against the actual rough opening, manufactured to that exact geometry, and installed with new framing, flashing and trim so the shape reads deliberate from the street. Call (833) 749-3967 and we’ll walk your openings with you before anything is ordered.
How a geometric window job runs, stage by stage

Shaped windows are not a shelf product. Nobody pulls a half-round off a rack. The sequence below is the one we follow on Irvine jobs, and it’s the reason a custom package takes weeks instead of a weekend.
Stage 1: Walk and template (day 1, roughly 90 minutes). We measure every opening, check whether the existing framing can carry the new unit, and photograph the wall from inside and out. You decide here which openings are staying rectangular and which get the arch, circle or angled head. This is also when we tell you honestly whether a shape suits the elevation or fights it.
Stage 2: Drawing and HOA submittal (days 2 through 10, sometimes longer). The manufacturer produces a shop drawing for each unit: radius, rise, mullion layout, glass makeup, exterior color. We hand that package to you for the architectural review committee, because in Irvine that committee, not the city, is usually the slower gate. You approve the drawing in writing before a single pane is cut.
Stage 3: Order and fabrication (weeks 3 through 6 for most units). Lead time depends on glass and finish. Standard vinyl shapes move faster than clad wood or aluminum with a custom radius. You use this stretch to settle interior trim and paint, which we need before install day.
Stage 4: Tear-out and install (one to three days per cluster of openings). We protect floors, pull the old unit and any rotted sill, reframe where the new geometry demands it, flash the exterior, set the window, insulate the gap, and trim the interior. Siding or stucco patching happens the same visit or the next, depending on how much wall the shape changes.
Stage 5: Inspection and punch (final week). Permit inspection where one is required, then a walkthrough with you at each opening. We operate every unit, check the locks and screens, and note anything that needs adjusting. That punch list is what the 730-Day Done Right Promise stands behind.
One decision per stage, no surprises dropped on you later. That’s the whole point of staging it.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The choices that actually change how these windows look and last
Most of the money in a geometric window is decided before install day. These are the levers:
- Frame material. Vinyl handles curves and arches well and costs the least; it’s the sensible pick for a tract home in Northwood. Clad wood and aluminum hold a crisper radius and a truer paint line on a high-visibility facade, at maybe 30 to 50 percent more per opening. Fiberglass sits between them and shrugs off heat.
- Glass package. Dual-pane low-E is standard here and worth it given Irvine’s long dry-season sun. Tempered glass is required for large units and any window near a door or the floor. Skip the upgrades only if the opening faces north and stays shaded.
- Shape and mullion layout. A half-round over a pair of rectangles, a true circle, a quarter-arch at a stair landing, an angled trapezoid under a gable: each adds fabrication complexity. Simple arches are priced close to rectangles; compound curves and true circles are not.
- Exterior color and trim profile. Your HOA palette constrains this more than your taste does. We match the approved color and pick a trim profile that reads consistent with the rest of the elevation.
- Interior finish. Drywall return, stained wood jamb, or painted casing. This is the choice homeowners regret skipping, because it’s the one you look at every day.
Andersen and Marvin both make shaped units we specify regularly, and James Hardie trim pairs cleanly with the exterior work if siding gets touched.
What Custom & Geometric Windows cost in Irvine, CA

Plan on $6,500 to $22,000 for a multi-window custom package in Irvine, or $1,200 to $4,500 per shaped opening on a single-unit job. That spread is wide because five things drive it:
- Size and geometry. A 4-foot half-round is a different order of cost from a floor-to-header arch with a custom radius.
- Condition behind the wall. Rotted framing, old aluminum flanges, or a sill that needs rebuilding adds labor you can’t see until tear-out.
- Reframing and structural work. Widening an opening or changing its shape means new headers and, sometimes, engineering. This is the biggest single jump in the number.
- Glass and finish grade. Tempered, laminated, or custom-painted units climb quickly.
- Permit and inspection scope. A like-for-like swap usually needs less paperwork than a new opening or a change to the wall.
Your written estimate lists each unit by size, glass spec, frame material and install labor, plus permit and disposal line items, so you can see exactly where the money goes. What it won’t include unless we scope it: interior paint, blinds, and any stucco or siding repair beyond the window opening. If the trim work grows into a bigger facade job, that’s where a full Windows & Doors in Irvine conversation comes in.
See the difference
Before
After
Before
After
Before
AfterWhat Irvine homes specifically do to this job
Irvine is a master-planned city, and that fact shapes every geometric window job here. Nearly all the housing stock is post-1970 planned-community tract work, townhomes and condos in villages like Woodbridge, Northwood and Turtle Rock, plus the newer Great Park builds on the old El Toro base. Almost every project runs through an HOA architectural review committee and the city’s own design review, not just a county permit desk. That’s the difference from Santa Ana or Tustin one city over, where older unincorporated stock means you deal mostly with the building department. Here you deal with a color palette and an approval gate first. Expect the HOA submittal to add a week or two before we can order, and plan your drawing package around that. The upside of the tract repetition is that we’ve seen the same wall assemblies across these villages, so we know where the framing runs and what the original flashing looks like.
The semi-arid climate matters too. Long dry summers bake exposed framing during a tear-out, which is why we don’t leave an opening unsealed overnight, and it drives demand for fire-hardened assemblies and low-E glass on west-facing walls. When a homeowner is reworking the front elevation, the shaped windows often pair with Concrete Driveways & Concrete Work in Irvine to finish the approach.
Serving Irvine, CA – Our Local Coverage Area
We serve Irvine and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked: Custom & Geometric Windows in Irvine

Most Irvine projects run three to six weeks from signed drawing to installed unit, with HOA approval and fabrication as the two longest waits. Install itself is fast once the units land, usually one to three days depending on how many openings. Call (833) 749-3967 and we’ll give you a realistic date range for your specific shapes.
Like-for-like replacement usually does not; a new opening, a change in size, or structural reframing generally does, and the HOA review runs alongside either way. We tell you which category your job falls into before we order, and we pull the permit where one is required. Call (833) 749-3967 to schedule a walkthrough and a free estimate.
Yes, whenever the new opening fits the existing rough opening or a simple enlargement within the wall cavity. If the shape change means a new header or relocating a vent stack, that moves into a different scope and we price it separately and up front. Call (833) 749-3967 and we’ll tell you which side of that line your job sits on.
A single shaped unit runs $1,200 to $4,500 installed, and a multi-window package lands between $6,500 and $22,000. Glass spec, frame material, reframing and HOA-required finishes are the four things that move the number most. Call (833) 749-3967 for a written line-item quote; estimates are free.
Our workmanship is covered by the 730-Day Done Right Promise, and the manufacturer’s warranty on the units runs on top of that. If a window doesn’t operate right or a seal fails, we come back and make it right. Call (833) 749-3967 to talk through the details before you commit.
If a driveway resurfacing is on the list too, Asphalt Driveways & Resurfacing in Irvine is the other job homeowners often pair with a facade refresh.
Get a free estimate for Custom & Geometric Windows in Irvine
We’ll come out, measure every opening, and hand you a written line-item quote with the shapes, glass specs and timeline spelled out. No pressure to sign on the spot. Our Windows & Doors service covers the full scope, and if your project sits in one of the covered ZIPs or villages across Irvine, we’ll confirm the walkthrough day when you call.
Call (833) 749-3967 for a free estimate. A live person answers, day or night. We’ll ask a few questions about your openings, then set a time to walk the house with you.
Written by the team at Groundwork Construction Co.












