







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Custom & Geometric Windows in Santa Ana: What the Job Actually Involves
Custom & Geometric Windows in Santa Ana usually means drawing, permitting, and building a shape that no factory stock size fits: arches, half-rounds, trapezoids, eyebrows, circles, and angled corner units for bungalows and Spanish Colonial Revival homes. Plan on 6 – 10 weeks from template to final inspection, and a total installed cost of roughly $4,500 – $15,000 for a focused set, with larger or multi-unit projects running to the $8,000 – $25,000 impact-glass tier. Call (833) 749-3967 to schedule a free on-site estimate.
How a Custom & Geometric Window Project Runs, Stage by Stage

Fixed shapes don’t come off a shelf, so the sequence matters more than it does on a standard replacement. Here’s how the work actually moves, and what you’ll be deciding at each step.
Day 1: Field measure and template
A technician measures the rough opening in multiple planes, checks for rack and sag in the existing wall, and confirms the radius or angle with a physical template if the shape is curved. This visit takes about 60 – 90 minutes for a single opening. You’ll decide frame material and finish at this stage because that choice changes the lead time.
Weeks 1 – 2: Shop drawings and permits
We produce scaled drawings showing the shape, glass makeup, and mounting detail. For a Santa Ana home of a certain age, plan on historic-preservation review before any structural change. You approve the drawing in writing, then we pull the permit. That approval window is the stage most likely to slow a project, so it’s the one we chase hardest.
Weeks 3 – 6: Fabrication
The shop builds the shape to the approved drawing. Arched and radius units take longer than rectangular ones because the sash has to be bent and the glazing cut to a pattern. Expect 4 – 6 weeks for a curved unit, 2 – 4 for an angled one.
Weeks 6 – 8: Demolition and rough prep
Out with the old unit, in with the framing and flashing. On a tight Santa Ana lot this is a one- to two-day window because there’s often nowhere to stage a dumpster except the alley or the street. We confirm access and parking before the crew arrives instead of discovering it on the morning of.
Weeks 8 – 10: Set, seal, and inspect
The unit goes in, the flashing and sealant go on, and the city inspector signs off. Trim and interior finish follow. Most jobs land in this timeline; a tough historic-property review or a backordered glass package pushes it out.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between
Custom shapes come down to a handful of real decisions. Each trades money against durability or appearance, and the honest answer depends on which wall it’s going into.
- Wood frame with a clad exterior (Andersen and Marvin territory): best for historic neighborhoods where the profile has to read correctly from the street. Warm inside, weather-resistant outside, and the highest cost of the group. Suits a 1920s bungalow or a Spanish Revival that needs to look right.
- Vinyl with a reinforced core: the value choice for arched and eyebrow units that don’t need to match a historic trim profile. Lower cost, less fuss, but a bulkier frame that can look out of place on a period facade.
- Fiberglass: stiff, stable in heat, and takes paint well. It’s a middle ground that works well on Santa Ana homes exposed to hot wind events where expansion and contraction are a real concern.
- Glass package: tempered glass is required for most shapes near a floor or door, and laminated or impact-rated glass is the right call if you’re on the eastern foothill edge where wildfire risk drives the choice. Low-E coatings help on west-facing arches that take the afternoon sun.
- Finish: paint-grade, primed, or a factory finish. Factory finish costs more and holds longer; paint-grade lets you match the house exactly.
The brand you pick should follow the shape and the home, not the other way around. We work with Andersen and Marvin on the wood-and-clad side and bring James Hardie trim where the opening needs durable exterior detailing around the frame.
What Custom & Geometric Windows Cost in Santa Ana, CA

Installed cost runs about $4,500 – $15,000 for a typical replacement set, and $8,000 – $25,000 when the job leans into impact-rated glass or a larger number of shaped units. A single arched or round feature window can land well under $4,500; a whole-house set of trapezoids and eyebrows will sit at the top.
What pushes a job to the low or high end:
- Shape complexity. A half-round is standard; a true ellipse or a compound arch is not, and the fabrication cost reflects that.
- Opening condition. A crooked, sagging opening in an older bungalow needs reframing before the new unit goes in.
- Structural or rough-opening changes. Resizing an opening, or adding one where there wasn’t a window before, means framing and a bigger permit scope.
- Glass spec. Tempered for safety, laminated or impact-rated for wildfire zones, Low-E for sun exposure. Each adds.
- Historic review. A property in a preservation area can require an extra review step and additional documentation.
A written estimate from us lists the unit, glass, trim, flashing, labor, permit fee, and inspection separately. What it typically doesn’t include is interior drywall repair and paint beyond the immediate opening, or any structural work that turns up after demo. We flag those up front so the number you see is the number you pay. That estimate is free, and 0% financing for 18 months is available if the total pushes past your budget.
See the difference
Before
After
Before
After
Before
AfterWhat Santa Ana Homes Specifically Do to This Job
The defining feature of Santa Ana construction is the tension between a large stock of pre-1950s single-family homes and aggressive infill redevelopment under adaptive-reuse and SB 9 lot-split rules. A crew here routinely works historic rehabilitation on one block and new multi-unit construction on the next. Much of the housing is 1920s – 1950s California bungalows, Spanish Colonial Revival and Craftsman homes, and postwar stucco tract housing, and that mix shows up in the openings. Bungalows around the Lacy area and downtown often hit original redwood framing and clay sewer laterals the moment you open a wall, which can trigger a city historic-preservation review before structural changes. In the denser stretches near the 92701 and 92707 ZIPs, alley-load and tight-side-yard access change how we stage, and parking has to be sorted before the truck rolls. And the hot, dry Santa Ana wind events push a lot of homeowners toward impact-rated glass on the east-facing foothill edges. That’s a different spec than you’d pick on a Tustin lot, and it’s why we look at the specific wall before quoting the glass.
Serving Santa Ana, CA – Our Local Coverage Area
We serve Santa Ana and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Custom & Geometric Windows in Santa Ana

Plan on 6 – 10 weeks from first measure to final inspection. The fabrication stage for curved and shaped units is the long pole at 4 – 6 weeks, and permits or historic review can add time on older homes but not on most newer ones. Call (833) 749-3967 to get a timeline for your specific opening.
Yes, a window replacement or new opening requires a permit in nearly every case, and we pull it. Structural changes or a historic property can require an extra preservation review. We handle the paperwork and schedule the inspection; that’s part of what the written estimate covers.
Often, yes, if the new opening replaces an existing one and the wall bearing stays put. Adding a window where there wasn’t one, or resizing an opening, means framing and a larger permit scope. We check the wall condition on the first visit and tell you honestly which side of that line your project is on.
Typically $4,500 – $15,000 installed, or $8,000 – $25,000 with a larger set and impact-rated glass. Shape complexity, opening condition, and glass spec are the big movers. Call (833) 749-3967 for an exact quote; estimates are free.
Every custom window project is covered by our 730-Day Done Right Promise, and if it isn’t done right we make it right. The manufacturer covers the unit itself; the installation and seal work is on us for the full term. It’s in writing before you sign.
Schedule Your Free Custom & Geometric Windows Estimate
If your Santa Ana home needs a shape that no stock size will solve, the next step is a free on-site estimate. Call (833) 749-3967 and a live person answers, any hour. We’ll measure the opening, talk through frame and glass choices, and put a written line-item number in front of you with no change orders down the road. While we’re there, we can also look at pairing the work with Concrete Driveways & Concrete Work in Santa Ana if the exterior is up for more.
Written by the team at Groundwork Construction Co.












