







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Backsplash, Tile & Flooring in Irvine, CA: Cutting Through the HOA Review First
Backsplash, tile and flooring work in Irvine typically runs $14,000 – $45,000 for a full kitchen tile and flooring package, and the biggest variable isn’t the tile you pick, it’s the architectural review committee that has to approve it. Most Irvine jobs clear approval in two to four weeks, then install takes five to ten working days. Call (833) 749-3967 to schedule a free on-site estimate and we’ll map out both the approval path and the install timeline.
How We Run a Tile and Flooring Job in Irvine, Stage by Stage

Approval gates sit in the middle of this work, so we build the schedule around them. Here’s what actually happens, in order.
1. Walkthrough and scope (day 1)
We measure every floor plane, check subfloor flatness, and photograph the existing backsplash bond. You tell us which rooms are in scope and whether the flooring continues under appliances. If your home is in Woodbridge or Northwood, we pull your village’s design guidelines before we quote – not after. That one step saves a homeowner from buying tile the committee won’t approve.
2. Selection and ARB submission (week 1-2)
You choose tile and grout, then we assemble the submittal: product cut sheets, a color sample board, and a layout drawing. Irvine HOAs want to see the material palette in context, not just a SKU. We handle the paperwork and attend to the questions the committee sends back. Most Irvine submissions come back approved, approved with a condition, or with a color swap request within two to four weeks.
3. Demo and prep (days 1-2 of install)
We protect cabinets and counters, remove the old backsplash, and grind thinset off the wall – this is the messy half-day. Flooring comes up next, then we check subfloor flatness. Older tract homes sometimes need a self-leveling pour, which adds a day of cure before tile goes down.
4. Tile setting (days 3-6)
Backsplash goes up first because it’s smaller and cures while the floors are prepped. Floors are set in the layout you approved. Large-format tile takes longer per square foot than subway tile. We keep a wet saw and a clean water source on site so cuts are consistent.
5. Grout, seal, and walkthrough (days 7-10)
Grout cures, we seal stone where it needs it, reinstall outlet covers and appliances, and do a final walkthrough with you. You sign off line by line. Anything wrong is corrected under the 730-Day Done Right Promise – our workmanship guarantee that runs nearly two full years.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Actually Choose Between in Irvine
Tile choice is where most Irvine budgets drift. Here’s the honest trade-off on each.
- Ceramic subway tile: the budget pick at roughly $6 – $12 per square foot installed. Fast to cut, approved nearly everywhere, but it cracks if you’re hard on the backsplash. Suits a kitchen where the floor is the star.
- Porcelain large-format: $15 – $30 per square foot installed. Fewer grout lines, easier to clean, requires a very flat wall. Best for Great Park-area new builds where the wall is already square.
- Natural stone (travertine, marble, slate): $25 – $50 per square foot installed. Beautiful, needs sealing every year or two, and some HOA palettes restrict it. Ask before you buy.
- Porcelain plank flooring: $8 – $18 per square foot. Mimics wood, holds up to wet mopping, no refinishing. A good pick for Irvine rentals and townhomes.
- Luxury vinyl plank: $5 – $12 per square foot. Cheapest, quiet underfoot, easy to replace a damaged board. Doesn’t have the resale weight of tile.
- Engineered hardwood: $12 – $25 per square foot. Warm underfoot, but not ideal in a powder room or laundry.
We work with established suppliers and offer KraftMaid and Wellborn cabinetry where the tile job turns into a cabinet swap, so finishes match across the kitchen. Ask for a sample board before you commit – reading a tile online and seeing it under Irvine’s bright afternoon sun are two different experiences.
What Backsplash, Tile & Flooring Costs in Irvine, CA

Most full backsplash, tile and flooring packages in Irvine land between $14,000 and $45,000. A backsplash-only job runs $800 – $2,500. Line-item pricing looks like this:
| Item | Irvine Range |
|---|---|
| Backsplash installation only | $800 – $2,500 |
| Floor tile (per room, mid-grade) | $3,000 – $9,000 |
| Full kitchen tile + flooring package | $14,000 – $45,000 |
| Subfloor leveling (if needed) | quoted as an add-on line |
| Grout sealing / stone sealing | included in our scope |
What pushes a job to the high end: square footage, whether the subfloor needs leveling, whether you relocate outlets or a gas line behind the backsplash, how expensive the tile itself is, and whether a permit or ARB submittal is triggered. What keeps it low: staying on the existing layout, mid-grade porcelain, and a single room in scope. Our estimate is written and itemized – the number you see is the number you pay, and 0% financing for 18 months is available so the five-figure tile job doesn’t hit your savings all at once. Projects over $10,000 take $1,000 off.
See the difference
Before
After
Before
After
Before
AfterWhat Irvine Homes Specifically Do to a Tile Job
Irvine is a master-planned city built out by the Irvine Company from the 1970s forward, so almost every job here runs through a village HOA and the city’s own design review before a tile saw comes out. That’s the opposite of Santa Ana or Tustin, where older unincorporated stock means less committee, more field inspection. In Woodbridge and Northwood, we see 1980s tract kitchens with the same failure pattern: builder-grade 4-inch ceramic backsplashes cracking where the drywall flexes, thin-set failing behind the range from years of cooking heat, and grout lines stained past cleaning. In Great Park-area new builds the tile is usually fine, but the slab or subfloor has its own quirks. The dry Mediterranean climate is friendly to tile work – no freeze-thaw – but it also bakes grout and dries out natural stone faster than a coastal climate would, which is why we specify an annual seal on stone here.
Because so much of Irvine sits under village HOAs, colors and material palettes get restricted in ways that never come up one city over, and getting the submittal right the first time is the difference between a two-week approval and a two-month one. We know the drill. If your project grows into a full kitchen scope, that opens the door to our Kitchen Remodeling service, and you can see how the broader work comes together on the Kitchen Remodeling in Irvine page. We cover all of Irvine, from the ZIP codes we work most in (92606, 92614, 92623, and 92710) out toward the edges. Homeowners often pair this job with a Vanities, Tile & Fixtures in Irvine upgrade in the bathroom, or a Tub-to-Shower Conversion in Irvine if a second bath is on the list.
Serving Irvine, CA – Our Local Coverage Area
We serve Irvine and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Backsplash, Tile & Flooring in Irvine

Install runs about five to ten working days once tile is on site and the HOA has approved the material palette; the approval step itself usually adds two to four weeks in Irvine. A backsplash-only job is often two to three days. Call (833) 749-3967 for a job-specific schedule.
Cosmetic backsplash and floor tile replacement typically doesn’t trigger a city building permit, but it almost always needs your village HOA’s architectural approval, and that’s where Irvine jobs get stuck. We handle the submittal and sign-off. Call us and we’ll tell you what your specific community needs.
Yes – and staying on the existing layout is the fastest, cheapest path. Moving a gas line, adding an outlet behind the backsplash, or relocating a sink is a separate scope that adds time and cost. We’ll quote it both ways so you can decide.
Most Irvine jobs come in between $14,000 and $45,000, with backsplash alone at $800 – $2,500 and single-room floor tile at $3,000 – $9,000. Call (833) 749-3967 – estimates are free and written line by line.
Every job we complete carries the 730-Day Done Right Promise – if it’s not done right, we make it right, for two full years. That’s one of the longest workmanship guarantees in the residential construction space. Ask about it at your estimate.
Get a Free Estimated Backsplash, Tile & Flooring Quote in Irvine
Tile work here starts with a conversation, not a knock on the door. Call (833) 749-3967 and a real person picks up – any hour, any day. We’ll ask about your rooms, your timing, and your HOA, then set a free on-site estimate. Expect a written, itemized quote with no surprises, financing options if you want them, and a clear answer on whether your village committee needs to weigh in before any tile is bought. That’s the whole pitch: upfront, specific, and backed in writing.
Written by the team at Groundwork Construction Co.












